- Joined
- Jul 10, 2014
- Posts
- 335
- Reaction
- 5,992
- Points
- 802
This For GLobe Broadband B933 na disconnected na..
Use Globe Tattoo Sim,,
Punta kayo sa Browser niyo para ma-access ang modem/router..
Type niyo sa address bar: 192.168.1.1/globe
Username : Admin
Password : gtadmin
Tapos nasa GUI na kayo na router niyo..
para sure na fresh at okey yung b933 modem niyo
mag Restore Defaults tayo,,
Go You do not have permission to view the full content of this post. Log in or register now.
Advanced Setting >> System >> Restore Defaults >> Continue/Ok!
wait naten mag reset ang modem..
Tapos Ayusin natin connection niyo,, punta kayo sa..
Admin Settings >> Dial-Up Settings >> Profile Settings
Gayahin niyo You do not have permission to view the full content of this post. Log in or register now...
Dapat ganito Profile Settings niyo
Profile List: Globe
Profile Name: Globe
Dial-up Number: *99***1#
PPP User Name: globe
PPP Password: globe
APN (Static): http.globe.com.ph
IP Address(Dynamic) : (wala kayo ilalagay, as in blank)
tapos save niyo.. then wait naten mag reconnect yung modem..
dapat lahat may ilaw specially yung WAN dapat green,,
tapos check niyo lang yung PPP settings niyo..
Admin Settings >> Dial-Up Settings >> PPP Settings
Profile List: Globe
PPP Connection: Auto
PPP Authentication: CHAP
PPP Max Idle Time(s): 600(dapat hindi yan clickable)
PPP MTU(B): 1500
PPP Max Dial Time(s): 120(dapat hindi yan clickable)
pag ganyan PPP settings niyo click back na..
tapos punta na tayo sa Basic Status at wait naten na maging connected yung status..
Ganun lang po kadali...
Sana nakatulong...
Use Globe Tattoo Sim,,
Punta kayo sa Browser niyo para ma-access ang modem/router..
Type niyo sa address bar: 192.168.1.1/globe
Username : Admin
Password : gtadmin
Tapos nasa GUI na kayo na router niyo..
para sure na fresh at okey yung b933 modem niyo
mag Restore Defaults tayo,,
Go You do not have permission to view the full content of this post. Log in or register now.
Advanced Setting >> System >> Restore Defaults >> Continue/Ok!
wait naten mag reset ang modem..
Tapos Ayusin natin connection niyo,, punta kayo sa..
Admin Settings >> Dial-Up Settings >> Profile Settings
Gayahin niyo You do not have permission to view the full content of this post. Log in or register now...
Dapat ganito Profile Settings niyo
Profile List: Globe
Profile Name: Globe
Dial-up Number: *99***1#
PPP User Name: globe
PPP Password: globe
APN (Static): http.globe.com.ph
IP Address(Dynamic) : (wala kayo ilalagay, as in blank)
tapos save niyo.. then wait naten mag reconnect yung modem..
dapat lahat may ilaw specially yung WAN dapat green,,
tapos check niyo lang yung PPP settings niyo..
Admin Settings >> Dial-Up Settings >> PPP Settings
Profile List: Globe
PPP Connection: Auto
PPP Authentication: CHAP
PPP Max Idle Time(s): 600(dapat hindi yan clickable)
PPP MTU(B): 1500
PPP Max Dial Time(s): 120(dapat hindi yan clickable)
pag ganyan PPP settings niyo click back na..
tapos punta na tayo sa Basic Status at wait naten na maging connected yung status..
Ganun lang po kadali...
Sana nakatulong...