Closed flare s3 power stock room pahngi po!

flare s3 power stock room pahngi po aq at may tut po ba kau paano q ibalik sa stock room tnx po

You do not have permission to view the full content of this post. Log in or register now. ito po link

rentao54321 said:

You do not have permission to view the full content of this post. Log in or register now. ito po link

Click to expand...

sir salamat po ask lng po aq may tut ba kau paano ibalik at gamitin e2 salamat po

rentao54321 said:

You do not have permission to view the full content of this post. Log in or register now. ito po link

Click to expand...

fs3 quad po ata yan sir. fs3 power hanap ni ts

THINGS YOU NEED

• Windows desktop or laptop
• USB Cable
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.

FLASH CHERRY MOBILE FLARE S3 POWER STOCK ROM

1. Create a new folder in your desktop and move the files that you have downloaded inside that folder then extract everything.
2. The first thing we are going to do is to install the MT65xx USB Preloader driver for Cherry Mobile Flare S3 Power. I made an article with a detailed instruction how to install the MT65xx USB driver. For Windows 7 see “You do not have permission to view the full content of this post. Log in or register now.” and for Windows 8 to the latest, see “You do not have permission to view the full content of this post. Log in or register now.”.
3. Assuming that your device has been successfully recognized by the computer. Unplug your device and proceed to the next step.
4. Open SP Flash tool folder and find flash_tool.exe, right click and choose run as administrator.
5. From the main menu of SP Flash tool, click scatter loading button and browse the scatter file insideFlare S3 Power stock ROM or inside the FilestoFlashTool folder.
6. After the files have been loaded, click Download button.
7. Now turn off your device it must be completely turn off or better wait for 5 to 10 seconds until the screen has turned into black.
8. Grab the USB cable, while holding volume up, connect your device into the computer.
9. After the computer has recognize your phone, you will see a progress bar from the SP Flash tool, it should be in different color such as violet then yellow and so on. In some case that you encountered BROM Error, don’t panic it only means that your Flare S3 Power is not yet completely recognize, just wait for the driver installation to finish. Note you don’t need to install anything; it will automatically install since you already installed the required USB driver. Once the driver has completely installed. Remove your phone from the computer and repeat the process from Step 7. Make sure to plug it in the same USB port.
10. The flashing process should start now. Wait it to finish. Once you see a green circle icon and a check inside it, you can now unplug your phone from the computer and turn it on

The boot time may take several minutes, if you follow the guide correctly you should restore your phone without a problem. By flashing the stock ROM or firmware your problem will be fix right away.

ok lng ba ibalik sa stock ang naroot na at may natanggal na aq na application?hnd po ba xa mabobotlof or dead?salamat po

khenchen said:

ok lng ba ibalik sa stock ang naroot na at may natanggal na aq na application?hnd po ba xa mabobotlof or dead?salamat po

Click to expand...

reflash sa stock? yep, mas ok po yun

Pwd ba to sa flare s3 mini ?

kevin joshua benson said:

Pwd ba to sa flare s3 mini ?

Click to expand...

hindi po sir meron din yan stockfirmware

boss pang version 1 ba yan?

sir pang version 1 po ba yan? thanks po