Closed Fix huawei bm622m firmware , no signal lights , ready only , and continues lan refresh

This are the fallowing errors that can be corrected:

• How To Fix Tulala LED BM622, BM622m, BM622i?
• No signal Lights
• My LAN continues Refresh connected disconnected if 622m firmware while on Greenpacket firmware
• LAN is normally connected.
• 622m web GUI status Ready
• Possible solution for 169 IP
• Unidentified Network
  
  Other find a solution use Winpsreader every time you want to connect ( hustle sign)
  
  Fix Restore your modem settings
  
  Continues LAN and Ready on Status (Normally this must be connecting not Ready)
  1. Get a Winspreader and Smart v7 firmware
  2. Open a Winspreader browse the Smart v7 firmware Hit start.
  3. Plug your Modem Power and Lan Cable the wait a few minutes.
  4. check the web GUI , type the 192.168.254.1 on your browser
  5. If you Gui Change to Smart.
  
  
  
  
  
  Open telnet 192.168.254.1
  login: mt7109
  password:wimax
  sncfg dset ADMIN_NAME admin (Enter)
  sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
  sncfg commit (Enter)
  /factoryreset.sh (Enter)
  
  
  NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1
  
  
  6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
  Open a browser type 192.168.15.1
  log in user :admin pass:smart
  
  7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
  wait 10 to 15 minutes slowly but surely effective flashing.
  
  8. After done Upgrade it will reboot hit that reboot and wait.
  
  9. reboot done check ip still 192.168.15.1 (smart)
  Open a browser type 192.168.15.1 then you will see PINK page with error link is like this You do not have permission to view the full content of this post. Log in or register now.
  
  Now open a telnet again
  Telnet 192.168.15.1
  
  Login:Firefly
  Pass:$P4mb1h1r4N4m4nT0!!
  /factoryreset.sh (enter)
  
  
  NOTE: wag na wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.
  
  
  10. dahil nag factory reset tayo automatic walang telnet yan log in ka
  username: user
  password: 0SlO051O
  Go to You do not have permission to view the full content of this post. Log in or register now. para ma access telnet niyo
  CHECK TELNET and click apply.
  
  11. Finally No signal Light lagyan ng signal lights
  
  Now open a telnet again
  Telnet 192.168.15.1
  
  Login:Firefly
  Pass:$P4mb1h1r4N4m4nT0!!
  rm etc/default.cfg ( Enter )
  reboot (Enter)
  
  
  
  rereboot yan may ilaw na modem niyo.
  
  Take Note yung original MAC and Serial niya sa sticker ay babalik parang brand new ulit yung modem niyo , at kung signal light lang habol niyo skip niyo nalang mga ibang step diretso na kayo sa step 11
  
  
  Optional kung 169 yung IP mag static saka ka mag winspreader with 622m firmware kung kaya pa.
  
  Download Winspreader v0.7 You do not have permission to view the full content of this post. Log in or register now.
  
  Credit kay April Bautista

kung sa unidentified network sir paano gawin sir ganyan kasi bm622m ko eh plsss tulong

Di po maopen ang telnet ko. paano po ito?help namn pre? idinaan kona sa winspreader kaso hindi ko parin maaccess telnet ko.

na remote yung modem ko naging "WRECKING_BALLS" and wan at lan. hindi ma access ang telnet. done winspreader several times pero ayaw parin ma flash ang firmware.

any suggestions po mga masters.

up same here sa 22m ayaw kumagat ng winspreader sa 22m ko no signal lights din 169 nung tinignan ko po sa ipconfig

imbz said:

This are the fallowing errors that can be corrected:

• How To Fix Tulala LED BM622, BM622m, BM622i?
• No signal Lights
• My LAN continues Refresh connected disconnected if 622m firmware while on Greenpacket firmware
• LAN is normally connected.
• 622m web GUI status Ready
• Possible solution for 169 IP
• Unidentified Network
  
  Other find a solution use Winpsreader every time you want to connect ( hustle sign)
  
  Fix Restore your modem settings
  
  Continues LAN and Ready on Status (Normally this must be connecting not Ready)
  1. Get a Winspreader and Smart v7 firmware
  2. Open a Winspreader browse the Smart v7 firmware Hit start.
  3. Plug your Modem Power and Lan Cable the wait a few minutes.
  4. check the web GUI , type the 192.168.254.1 on your browser
  5. If you Gui Change to Smart.
  
  View attachment 17919
  
  Open telnet 192.168.254.1
  login: mt7109
  password:wimax
  sncfg dset ADMIN_NAME admin (Enter)
  sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
  sncfg commit (Enter)
  /factoryreset.sh (Enter)
  
  
  NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1
  
  
  6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
  Open a browser type 192.168.15.1
  log in user :admin pass:smart
  
  7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
  wait 10 to 15 minutes slowly but surely effective flashing.
  
  8. After done Upgrade it will reboot hit that reboot and wait.
  
  9. reboot done check ip still 192.168.15.1 (smart)
  Open a browser type 192.168.15.1 then you will see PINK page with error link is like this You do not have permission to view the full content of this post. Log in or register now.
  
  Now open a telnet again
  Telnet 192.168.15.1
  
  Login:Firefly
  Pass:$P4mb1h1r4N4m4nT0!!
  /factoryreset.sh (enter)
  
  
  NOTE: wag na wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.
  
  
  10. dahil nag factory reset tayo automatic walang telnet yan log in ka
  username: user
  password: 0SlO051O
  Go to You do not have permission to view the full content of this post. Log in or register now. para ma access telnet niyo
  CHECK TELNET and click apply.
  
  11. Finally No signal Light lagyan ng signal lights
  
  Now open a telnet again
  Telnet 192.168.15.1
  
  Login:Firefly
  Pass:$P4mb1h1r4N4m4nT0!!
  rm etc/default.cfg ( Enter )
  reboot (Enter)
  
  
  
  rereboot yan may ilaw na modem niyo.
  
  Take Note yung original MAC and sêrïâl niya sa sticker ay babalik parang brand new ulit yung modem niyo , at kung signal light lang habol niyo skip niyo nalang mga ibang step diretso na kayo sa step 11
  
  
  Optional kung 169 yung IP mag static saka ka mag winspreader with 622m firmware kung kaya pa.
  
  dôwnlôad Winspreader v0.7 You do not have permission to view the full content of this post. Log in or register now.
  
  Credit kay April Bautista .

Click to expand...

Salamat po sa tools...

Salamat po sa info sir imbz.

pedeba sa bm622i yang winspreader mga bossing?

parang may kapareho kang thread sir. same lahat ng details at description. http://blogmytuts.phc.onl/#forbidden#/2014/03/how-to-fix-huawei-bm622m-no-signal.html

Di po yata pede to sa bm622i 2010?

anyways. salamat po for sharing

sir. nkkpgbrowse ako khit wlang ilaw ung bm622m ko..

san yung link ng smart v7 firmware sir? di ko makita.

ts help naman po! pag ka upgrade ko kc sa firmware ng 22m boot loop na sya, hindi na maaccess yung telnet,hanggang procedure 8 lang ako,

salamat dito boss

sir nagdisco lights lang yung lan. iniwan ko lang po habang chinechek yung gui kung nagchange na. ganun pa rin globe pa rin more than an hour na siya ganun pa din po. anong pwede ko gawin dito? bm622i 2011

Newbie po. I tried using transmit tool ganun din po. walang nagbabago. I can access telnet, gui, at magchange mac. Pending disconnect ang WAN. at connecting ang status niya. Wala lang siyang signal lights... signal goes up to 70-80 percent tapos biglang nag zezero percent. Pahelp po please....

Khalinthura said:

san yung link ng smart v7 firmware sir? di ko makita.

Click to expand...

ako rin di ko alam san nga ba sir?

Hindi kumakagat yung winspreader . may iba pabang paraan.

sir success na po may ilaw na din yung modem ko ang problema hindi naman maka connect sa wifi, authentication probem pano po to ayusin?




haha isa lang pala akong malaking T yehey ok na thank you uli^^