Closed Firm ware cherry mobile flare dash

jericson0051 said:

pano po i root ang flare dash ?


panu mo ni root ang flare dash ? salamat

Click to expand...

Download supersu.zip tpos boot s recovery mode volup + power wait. Select update internal select supersu.zip or download kinguser and king root install king user then install kingroot open then click root or the middle of the screan

pahingi po stock rom ng flare dash........................
at pki samahan nrin po ng instructions on how to flash this qualcomm base phone......
kung ok lang po........


thanks po....

i need the latest os for cm flare dash pls help

paano po ayosin flare dash na may error na,
"E:failed to mount /data (Invalid argument)"???

s mga gsto mgroot Kingroot gmtn nyo...hnapin nyo muna usb driver ng flare dash bgo kyo mgproceed s pgroroot

,mga maam mga sir pano gagawin pag nastock lang sa flaredash na logo ung phone mo?

sir stock in logo po ako flare dash,,, "bootloop" sir panu po to fix latest firmware po? salamat po in advnce

Need ko din stock rom ng flare dash..

Cherry Mobile Flare S3 ROM



You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
"DOWNLOAD THESE FILES"
Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
VCOM Driver -->You do not have permission to view the full content of this post. Log in or register now.
Alternative Driver --> You do not have permission to view the full content of this post. Log in or register now.
SPFlashTool --> You do not have permission to view the full content of this post. Log in or register now.

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"


Installing Driver with AutoInstaller


First try the Alternative Driver, which is the You do not have permission to view the full content of this post. Log in or register now.. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:

1. Turn off your phone (always powered off is a must)
2. Press and hold volume up or down, or you can simple press the two button
3. *********** USB cable without releasing the VOLUME button(s).
4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
5. Repeat 1 to 4 if it does not detect your phone.
6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)
You do not have permission to view the full content of this post. Log in or register now.

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)



"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)


Reference Video Using FlashTool version 5.xxx (watch in HD)



3. After you load the file, press Press Download to Flash your Phone.


4. After you press Download Follow these steps

• Turn off your phone (always powered off is a must)
• Press and HOLD volume UP or Down or you can simply press it simultaneously
• *********** USB cable without releasing the VOLUME button(s).
• Keep on repeating until Flashtool detected your phone.

5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.


"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool

1. Load the scatter file
2. Choose Format all + Download (Underneath Scatter-loading file)
3. Then Click Download and wait until it is done flashing

If you encounter Privacy Protection Password:

1. Open flash_tool.exe
2. Load the scatter file
3. Goto Format Tab
4. Click on Format except bootloader
5. Press Play/Start Icon
6. Then remove battery
7. Insert the battery again
8. Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
9. After done formatting proceed in Flashing.
10. Goto Download tab (I assume that you loaded the scatter file already)
11. Uncheck PRELOADER (this is very important)
12. Press Download
13. Then remove battery
14. Insert Battery again
15. Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
16. Power ON the phone after flashing.
17. Restore your IMEI.

For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.-

Cherry Mobile Amber

Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
VCOM Driver -->You do not have permission to view the full content of this post. Log in or register now.
Alternative Driver --> You do not have permission to view the full content of this post. Log in or register now.
SPFlashTool --> You do not have permission to view the full content of this post. Log in or register now.

Cherry Mobile Volt



Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
VCOM Driver -->You do not have permission to view the full content of this post. Log in or register now.
Alternative Driver --> You do not have permission to view the full content of this post. Log in or register now.
SPFlashTool --> You do not have permission to view the full content of this post. Log in or register now.

Cherry Mobile Sonic




Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
VCOM Driver -->You do not have permission to view the full content of this post. Log in or register now.
Alternative Driver --> You do not have permission to view the full content of this post. Log in or register now.
SPFlashTool --> You do not have permission to view the full content of this post. Log in or register now.

Cherry Mobile Granite


Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
Firmware Here -->You do not have permission to view the full content of this post. Log in or register now.
VCOM Driver -->You do not have permission to view the full content of this post. Log in or register now.
Alternative Driver --> You do not have permission to view the full content of this post. Log in or register now.
SPFlashTool --> You do not have permission to view the full content of this post. Log in or register now.

penge nmn po ng firmware ng flare dash

pano po irevived deadboot flare dash na dettected pa ng pc

may firmware ka po ng flare dash