1. Welcome to PHCorner Forums. Take a moment to Sign up and gain unlimited access and extra privileges that guests are not entitled to, such as:

    All that and more! Registration is quick, simple and absolutely free. Join our community today!

Tutorial Computer Starts but Screen Remains Blank or Black (Windows 8)

Discussion in 'Windows Tools & Tips' started by dan, Jul 2, 2014.

  1. dan

    dan Addict Established

    Follow the steps in this document to resolve an issue with the screen remaining blank after the computer is turned on.

    Step 1: Performing a hard reset to resolve a blank screen
    Completely resetting the computer can resolve many issues that cause a blank screen. Follow these steps to perform a hard reset:
    1. Turn off the computer.
    2. Disconnect all peripheral devices and remove all USB devices and media cards.
    3. Disconnect the AC power adapter and remove the battery.
    4. Press and hold the power button for at least 15 seconds.
    5. Reconnect the AC power adapter, but do not connect the battery.
    6. Turn on the computer.
      If the blank screen issue is resolved, you are done.
      If the screen is still blank, continue with the next step to connect an external monitor to test the display.

    Step 2: Connecting an external monitor to test the display
    The notebook's screen display may remain black when there is a corrupted graphics driver, or a problem with the LCD display's back light. You can test the display by attaching an external monitor and restarting the computer. Testing with an external display is helpful if the notebook display is black but you can hear sounds; such as fans, spinning drives, or beep tones which indicate that the computer is operating. If you can hear sounds of operation but no image is visible on either display, contact an authorized repair center.
    1. If you are having trouble viewing the external monitor, press F4 (or the key with this symbol [​IMG] ) to switch the screen image among display devices connected to the system.
    2. If an image displays on the external monitor, there may be a graphics driver conflict with the notebook’s LCD display. With the external monitor connected, go to the Please or Register to view links page to download and install the latest drivers for your specific computer and graphic chip set.
    If there is an image on the external monitor and you have installed the latest BIOS, updated CPU chips set, and updated graphics drivers but the notebook display remains black, the LCD may be defective. It may be necessary to contact HP for technical assistance or send the notebook for service to replace the display.

    Step 3: Resetting and updating the BIOS to resolve a blank screen
    In case an item was changed in the BIOS, use the following steps to reset the BIOS back to its default configuration:
    You can use these steps even though you will not be able to see anything on the monitor.
    1. Turn on the computer and repeatedly press the F10 key for eight seconds.
    2. Wait another 5 seconds.
    3. Press the F9 key. This restores the default settings of the BIOS.
    4. Press the Enter key. This accepts the changes.
      Press the F10 key. This saves the changes.
      Press the Enter key. This saves the changes and exits from the BIOS.
    5. The computer restarts.
      If the screen is still blank, continue with the next step to reseat the memory modules.

    Step 4: Reseating the memory modules to resolve a blank screen
    A computer may not display an image if a memory module is loose. Reseating the memory modules may resolve blank screen issues. To reseat the memory module, take the memory module out of the memory slot and then put it back into the slot to get a better connection so that the computer can recognize the memory.
    Use the following steps to remove and reseat the memory modules:
    NOTE:These steps will work for most notebook computer models. To find steps for your specific computer, enter your computer model number and replace memory into the search field at the top of this window. For example, if you have an HP Mini 210-3000, you would search for 210-3000 replace memory . If you cannot find a memory replacement procedure for your computer module, check the User Guides.
    1. Remove electrical power
      To remove all power from the computer and prevent accidental damage to the electronic components, do the following:
      1. Turn off the computer by pressing and holding down the Power button for about 30 seconds.
      2. Unplug the AC adaptor from the notebook.
      3. Slide and hold the battery release latch to the unlock position.
      4. Use your finger to lift the battery up and out.
    2. Remove the memory module
      Follow these steps to remove and reseat the memory module:
      1. Follow these steps to remove and reseat the memory module:
        Remove the memory module cover on the bottom of the notebook.
        1 - Loosen the compartment's retention screws
        2 - Lift up and remove the memory compartment cover
      2. Remove the memory modules from the memory slots.
        1 - Pull the retention clips away from sides of the memory module
        2 - Gently pull the module out of the memory module slot

        CAUTION:To prevent damage to the memory module, grasp the memory module by the side edges. Do not touch the metal contacts.
      3. Reseat the memory module by holding module at a 45-degree angle, and pressing it firmly into the memory slot until it is seated.
        1 - Align the notched edge of the module with the tab in the slot.
        2 - Firmly press the module into the slot.
        3 - Pivot top edge of memory module downward until retention clips snap into place.
      4. After reseating the memory module, replace the cover over the memory compartment before restarting the computer.
        1 - Align the cover tabs
        2 - Tighten the memory compartment cover screws
    3. Replace electrical power
      When troubleshooting problems, use only the AC power to perform the tests. After the problem is resolved, you can turn off the computer and insert the battery into the notebook.
      1. Plus the connection from the AC adapter into the notebook, and then connect the AC adapter to a working power supply.
      2. Perform any tests to verify the computer can startup and run in the Windows operating system.
      3. With the computer turned off, push the battery into the base enclosure until the retention clips click into position.
      If the computer fails to boot to the Windows desktop after the memory is reseated and the battery is installed, contact HP for support.
    Credits to: Please or Register to view links

    For Windows 7: Please or Register to view links
    x_Michael Ron_x likes this.
  2. Thanks sa pag share :D
  3. sana maayus ko blank screen ng laptop ko dito mamaya.salamat po dito
    x_Michael Ron_x likes this.
  4. -*
    keep it up and thank you for sharing...:)
  5. Thanks for sharing :)

Share This Page