Re-Update Thread.
[Link Added]
Research Article: -Zaki™
- Special Credit to the Creator of this Article:
Mr/Ms: Maribel Nuarin.
I was able to make a ROM dump of Cherry Mobile Flare Lite. And here it is. It is ready for download. I was able to test it too in a dead Cherry Mobile Flare Lite yesterday. So I can assure that this firmware is fully working. You can download the file below.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware
"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare Lite Part 1 ( You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 2
(You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 3
(You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 4
(You do not have permission to view the full content of this post. Log in or register now.)
VCOM Driver -->VCOM Manual (You do not have permission to view the full content of this post. Log in or register now.)
Alternative Driver --> AutoInstaller
(You do not have permission to view the full content of this post. Log in or register now.)
SPFlashTool --> LatestVersion (You do not have permission to view the full content of this post. Log in or register now.)
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver"
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exethen it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
Turn off your phone (always powered off is a must)Press and hold volume up or down, or you can simple press the two button*********** USB cable without releasing the VOLUME button(s).In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.Repeat 1 to 4 if it does not detect your phone.If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
Turn off your phone (always powered off is a must)Press and HOLD volume UP or Down or you can simply press it simultaneously*********** USB cable without releasing the VOLUME button(s).Keep on repeating until Flashtool detected your phone.5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
If you encounter Privacy Protection Password:
Open flash_tool.exeLoad the scatter fileGoto Format TabClick on Format except bootloaderPress Play/Start IconThen remove batteryInsert the battery againInsert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)After done formatting proceed in Flashing.Goto Download tab (I assume that you load the scatter file already)Uncheck PRELOADER (this is very important)Then remove batteryInsert Battery againInsert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)Power ON the phone after flashing.Restore your IMEI.
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)
1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)
2. In MTKDroidstool (I assume you launch the tool) -- Click in Root.
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working
I hope this tutorial help you. Please drop a comment if something is not clear to you.
[Link Added]
Research Article: -Zaki™
- Special Credit to the Creator of this Article:
Mr/Ms: Maribel Nuarin.
I was able to make a ROM dump of Cherry Mobile Flare Lite. And here it is. It is ready for download. I was able to test it too in a dead Cherry Mobile Flare Lite yesterday. So I can assure that this firmware is fully working. You can download the file below.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware
"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare Lite Part 1 ( You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 2
(You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 3
(You do not have permission to view the full content of this post. Log in or register now.)
Firmware Here -->Cherry Mobile Flare Lite Part 4
(You do not have permission to view the full content of this post. Log in or register now.)
VCOM Driver -->VCOM Manual (You do not have permission to view the full content of this post. Log in or register now.)
Alternative Driver --> AutoInstaller
(You do not have permission to view the full content of this post. Log in or register now.)
SPFlashTool --> LatestVersion (You do not have permission to view the full content of this post. Log in or register now.)
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver"
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exethen it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
Turn off your phone (always powered off is a must)Press and hold volume up or down, or you can simple press the two button*********** USB cable without releasing the VOLUME button(s).In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.Repeat 1 to 4 if it does not detect your phone.If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
Turn off your phone (always powered off is a must)Press and HOLD volume UP or Down or you can simply press it simultaneously*********** USB cable without releasing the VOLUME button(s).Keep on repeating until Flashtool detected your phone.5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
If you encounter Privacy Protection Password:
Open flash_tool.exeLoad the scatter fileGoto Format TabClick on Format except bootloaderPress Play/Start IconThen remove batteryInsert the battery againInsert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)After done formatting proceed in Flashing.Goto Download tab (I assume that you load the scatter file already)Uncheck PRELOADER (this is very important)Then remove batteryInsert Battery againInsert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)Power ON the phone after flashing.Restore your IMEI.
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)
1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)
2. In MTKDroidstool (I assume you launch the tool) -- Click in Root.
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Last edited: