Serial-Code
Honorary Poster
- Joined
- Oct 14, 2014
- Posts
- 616
- Reaction
- 380
- Points
- 253
Version 2 means Spreadtrum SC7731C ang V1 mga master ay SC7731G
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / SoftbrickPart One: Installing drivers
1. Extract the driver file.
2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and remove the battery then insert back the battery again.
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!
Part Two: Using Research Download
1. Extract Research Download file
2. Extract your downloaded stock ROM file
3. Run ResearchDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button.
5. Once the PAC file is loaded click play button .
6.Connect your Flare Lite 2S (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!
Links:
[SC7731][5.1]Cherry Mobile Flare Lite 2S V2 PAC Firmware Final By Team YuniX.7z
Research Download
Research Download
Dont forget to HIT like and RUN
GoodLuck Guys!..
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / SoftbrickPart One: Installing drivers
1. Extract the driver file.
2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and remove the battery then insert back the battery again.
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!
Part Two: Using Research Download
1. Extract Research Download file
2. Extract your downloaded stock ROM file
3. Run ResearchDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button.
5. Once the PAC file is loaded click play button .
6.Connect your Flare Lite 2S (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!
Links:
[SC7731][5.1]Cherry Mobile Flare Lite 2S V2 PAC Firmware Final By Team YuniX.7z
Spoiler contents are visible only to Established Members.
Research Download
Spoiler contents are visible only to Established Members.
Research Download
Spoiler contents are visible only to Established Members.
Dont forget to HIT like and RUN
GoodLuck Guys!..