- Joined
- Jul 10, 2014
- Posts
- 335
- Reaction
- 5,992
- Points
- 802
Hello guys i-share ko lang kung paano mag-upgrade ng firmware ng Bm622i using Multicast Package Transmit Tool
Pwede to guys sa mga may problem about hindi maopen ang gui at telnet or iniba ang access codes like user user or wimax wimax820.
Reminder guys that once successful ang upgrade magiging 2011 na ang firmware ng Bm622i nyo. Kung may firmware problem kayo ok lang it's worth the try di ba!
Things we need to perform this method. Copy and paste sa new tab (ctrl+N) paste (ctrl+v) nyo lang para madownload nyo.
1) You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
2) You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
3) Sabi nga nila "common sense"
If error don't worry
Update DL Link:
Multicast Package Transmit Tool
You do not have permission to view the full content of this post. Log in or register now.
Bm622i 2011 Firmware
You do not have permission to view the full content of this post. Log in or register now.
Ok lets start!!
Once nadownload nyo na ang mga kailangan
Reminder hindi pa po nakasaksak ang modem nyo bago nyo po ito gawin
A) Ang una nyong gawin i-copy at i-paste nyo sa Local C: nyo yung Bm622i firmware.
B) Open nyo na yung Multicast Package Transmit Tool
As shown in the pix dun sa number 1 select nyo yung Lan Card nyo! Then dun sa number 2 select nyo yung firmware na nilagay nyo sa Local C: nyo. Then click start as shown sa number 3! Reminder guys yan lang ang gagalawin nyo.
C) Once naclick nyo na ang start button i-plug ang Lan cable sa modem mo then i-plug ang power adaptor. Malinaw guys ha mauuna i-plug ang Lan cable then yung adaptor naman. Then kung mapapansin nyo magiging disco light ang signal led ng modem nyo tanda yun na ngwriwrite na ng firmware sa modem nyo. It would take about 3-5 minutes (yan yung sa experience ko.)
D) Then after the upgrade process at nagsteady na ang signal led nyo tapos na ang upgrade pwede nyo na i-stop ang Multicast Package Transmit Tool. Eto po ang importante kapag ang nag steady na signal led ay ang number 1,4 at 5 meaning successful ang upgrade nyo. Kapag ang nagsteady naman ay ang signal led number 2 at 3 meaning hindi po success ang upgrade nyo ulitin nyo na lang.
Then after magsteady na ang signal led pwede mo na ireboot ang modem mo by unplugging it then plug mo na ulit then pasukin mo na ang gui to see na 2011 na ang firmware mo!
Sana nakatulong ako sa inyo guys!
Credits po kay sir Galaxyman sa tool!!!
at kay: abidrei for exact tutorial..
Pwede to guys sa mga may problem about hindi maopen ang gui at telnet or iniba ang access codes like user user or wimax wimax820.
Reminder guys that once successful ang upgrade magiging 2011 na ang firmware ng Bm622i nyo. Kung may firmware problem kayo ok lang it's worth the try di ba!
Things we need to perform this method. Copy and paste sa new tab (ctrl+N) paste (ctrl+v) nyo lang para madownload nyo.
1) You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
2) You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
3) Sabi nga nila "common sense"
If error don't worry
Update DL Link:
Multicast Package Transmit Tool
You do not have permission to view the full content of this post. Log in or register now.
Bm622i 2011 Firmware
You do not have permission to view the full content of this post. Log in or register now.
Ok lets start!!
Once nadownload nyo na ang mga kailangan
Reminder hindi pa po nakasaksak ang modem nyo bago nyo po ito gawin
A) Ang una nyong gawin i-copy at i-paste nyo sa Local C: nyo yung Bm622i firmware.
B) Open nyo na yung Multicast Package Transmit Tool
As shown in the pix dun sa number 1 select nyo yung Lan Card nyo! Then dun sa number 2 select nyo yung firmware na nilagay nyo sa Local C: nyo. Then click start as shown sa number 3! Reminder guys yan lang ang gagalawin nyo.
C) Once naclick nyo na ang start button i-plug ang Lan cable sa modem mo then i-plug ang power adaptor. Malinaw guys ha mauuna i-plug ang Lan cable then yung adaptor naman. Then kung mapapansin nyo magiging disco light ang signal led ng modem nyo tanda yun na ngwriwrite na ng firmware sa modem nyo. It would take about 3-5 minutes (yan yung sa experience ko.)
D) Then after the upgrade process at nagsteady na ang signal led nyo tapos na ang upgrade pwede nyo na i-stop ang Multicast Package Transmit Tool. Eto po ang importante kapag ang nag steady na signal led ay ang number 1,4 at 5 meaning successful ang upgrade nyo. Kapag ang nagsteady naman ay ang signal led number 2 at 3 meaning hindi po success ang upgrade nyo ulitin nyo na lang.
Then after magsteady na ang signal led pwede mo na ireboot ang modem mo by unplugging it then plug mo na ulit then pasukin mo na ang gui to see na 2011 na ang firmware mo!
Sana nakatulong ako sa inyo guys!
Credits po kay sir Galaxyman sa tool!!!
at kay: abidrei for exact tutorial..
Last edited:
