What's new

Closed Stock/custom rom for cm flare 2.1

Status
Not open for further replies.

phi9jaa

Enthusiast
Joined
Jul 17, 2014
Posts
3
Reaction
2
Points
63
Age
30
Guys sino may alam kung pano mag Custom/Stock ROM for CM flare 2.1? And which is better Custom or Stock ROM?
 
Itong Tutorial Na Ito Ay Para Lamang Sa Mga Na Bootloop Na Walang Cwm & Pwede Rin Pang Flash Ng Recovery Using This Procedure

Things We Need:


1.Your Phone (Flare2.0/2.1)

2.USB Cable

3.You do not have permission to view the full content of this post. Log in or register now.

4.Recovery(CwmOrMIUI)

5.You do not have permission to view the full content of this post. Log in or register now. : You do not have permission to view the full content of this post. Log in or register now.

Optional


You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now.

NOTE:MIUI Recovery Is Protected Zip Pm Admin For Password Of Zip File Thanks :)



LET'S Start !

1.Install Moborobo

You do not have permission to view the full content of this post. Log in or register now.

2.Boot Your Phone (Flare2.0/2.1) Into Bootloader Remove Battery Of Your Phone (Flare2.0/2.1) Then Return The Battery Of Your Phone HOLD VOLUME DOWN + Power Button Pag Lumabas Na Yung Logo Ng Flare Bitawan Na Yung VOLUME DOWN & Power Button

You do not have permission to view the full content of this post. Log in or register now.

3.Plug Your Phone (Flare2.0/2.1) Dapat Naka Boot Sya Sa Bootloader Bago I Plug

You do not have permission to view the full content of this post. Log in or register now.

4.Open Moborobo

You do not have permission to view the full content of this post. Log in or register now.

5. Makikita Nyo Sa Moborobo Yung 1a2xxxx Pag Nakita Nyo Yun Mag Iinstall Driver Si Moborobo Wait Mo Lang Matapos Installing Driver Ni Moborobo Pag Tapos Na

You do not have permission to view the full content of this post. Log in or register now.

6.Extract "Adb&Fastboot For Bootloop Etc (No Cwm)"

You do not have permission to view the full content of this post. Log in or register now.

7.Install "minimal_adb_fastboot_v1.1.3_setup"

You do not have permission to view the full content of this post. Log in or register now.

8.After Setup Is Finish "Check" Launch Minimal Adb And Fastboot

You do not have permission to view the full content of this post. Log in or register now.

9.Type In The Minimal Adb And Fastboot "fastboot devices"

You do not have permission to view the full content of this post. Log in or register now.

10.Dapat may Lalabas na Code Na Nakita NyoSa Moborobo Yung Serial Number Nyo 8 Numbers & Letters Ata Yun

You do not have permission to view the full content of this post. Log in or register now.

11.Hanapin Nyo Yung Folder Ng Minimal Adb & Fastboot Then Paste Nyo Dun Yung Recovery Na Dinownload Nyo Kanina

You do not have permission to view the full content of this post. Log in or register now.

12.Pag Nakita Nyo Na Yung Code TypeFor Clockworkmod Recovery

You do not have permission to view the full content of this post. Log in or register now.

(Ito Yung Type Mo Kung Clockworkmod Recovery Dinownload Mo)

You do not have permission to view the full content of this post. Log in or register now.

fastboot flash recovery recovery.imgFor MIUI Recovery

You do not have permission to view the full content of this post. Log in or register now.

(Ito Yung Type Mo Kung MIUI Recovery Dinownload Mo)

You do not have permission to view the full content of this post. Log in or register now.

fastboot flash recovery MIUIFix.img

You do not have permission to view the full content of this post. Log in or register now.

Wait Matapos

You do not have permission to view the full content of this post. Log in or register now.

Pag Tapos Na Remove Your Battery Tas Return Your Battery Then Boot To RecoveryHold Power

You do not have permission to view the full content of this post. Log in or register now.

Button + Volume Up Para Mag Boot Sa Recovery Pag Nag Boot Sa Recovery!

You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now.

Mag Flash Ka Na Ng Rom na Gusto Mo :) Enjooy :)


flare 2.0/2.1 stock rom

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
 
Itong Tutorial Na Ito Ay Para Lamang Sa Mga Na Bootloop Na Walang Cwm & Pwede Rin Pang Flash Ng Recovery Using This Procedure

Things We Need:


1.Your Phone (Flare2.0/2.1)

2.USB Cable

3.You do not have permission to view the full content of this post. Log in or register now.

4.Recovery(CwmOrMIUI)

5.You do not have permission to view the full content of this post. Log in or register now. : You do not have permission to view the full content of this post. Log in or register now.

Optional


You do not have permission to view the full content of this post. Log in or register now.


You do not have permission to view the full content of this post. Log in or register now.


NOTE:MIUI Recovery Is Protected Zip Pm Admin For Password Of Zip File Thanks :)



LET'S Start !

1.Install Moborobo


2.Boot Your Phone (Flare2.0/2.1) Into Bootloader Remove Battery Of Your Phone (Flare2.0/2.1) Then Return The Battery Of Your Phone HOLD VOLUME DOWN + Power Button Pag Lumabas Na Yung Logo Ng Flare Bitawan Na Yung VOLUME DOWN & Power Button


3.Plug Your Phone (Flare2.0/2.1) Dapat Naka Boot Sya Sa Bootloader Bago I Plug


4.Open Moborobo


5. Makikita Nyo Sa Moborobo Yung 1a2xxxx Pag Nakita Nyo Yun Mag Iinstall Driver Si Moborobo Wait Mo Lang Matapos Installing Driver Ni Moborobo Pag Tapos Na


6.Extract "Adb&Fastboot For Bootloop Etc (No Cwm)"


7.Install "minimal_adb_fastboot_v1.1.3_setup"


8.After Setup Is Finish "Check" Launch Minimal Adb And Fastboot


9.Type In The Minimal Adb And Fastboot "fastboot devices"


10.Dapat may Lalabas na Code Na Nakita NyoSa Moborobo Yung sêrïâl Number Nyo 8 Numbers & Letters Ata Yun


11.Hanapin Nyo Yung Folder Ng Minimal Adb & Fastboot Then Paste Nyo Dun Yung Recovery Na Dinownload Nyo Kanina


12.Pag Nakita Nyo Na Yung Code TypeFor Clockworkmod Recovery


(Ito Yung Type Mo Kung Clockworkmod Recovery Dinownload Mo)


fastboot flash recovery recovery.imgFor MIUI Recovery


(Ito Yung Type Mo Kung MIUI Recovery Dinownload Mo)


fastboot flash recovery MIUIFix.img


Wait Matapos


Pag Tapos Na Remove Your Battery Tas Return Your Battery Then Boot To RecoveryHold Power


Button + Volume Up Para Mag Boot Sa Recovery Pag Nag Boot Sa Recovery!



Mag Flash Ka Na Ng Rom na Gusto Mo :) Enjooy :)


flare 2.0/2.1 stock rom

You do not have permission to view the full content of this post. Log in or register now.
Di ko po madownload..help pls..patunayan nyo na may kwenta tong link nyo!
 
wag kang maatumiti dyan, kaw pa nga binigyan ng link at tut kaw pa ang marunong magalit? huwag kang ma spoonfeeding dyan.!!!!!
 
Itong Tutorial Na Ito Ay Para Lamang Sa Mga Na Bootloop Na Walang Cwm & Pwede Rin Pang Flash Ng Recovery Using This Procedure

Things We Need:


1.Your Phone (Flare2.0/2.1)

2.USB Cable

3.You do not have permission to view the full content of this post. Log in or register now.

4.Recovery(CwmOrMIUI)

5.You do not have permission to view the full content of this post. Log in or register now. : You do not have permission to view the full content of this post. Log in or register now.

Optional


You do not have permission to view the full content of this post. Log in or register now.
PM mo naman .zip ng miui recovery

You do not have permission to view the full content of this post. Log in or register now.


NOTE:MIUI Recovery Is Protected Zip Pm Admin For Password Of Zip File Thanks :)



LET'S Start !

1.Install Moborobo


2.Boot Your Phone (Flare2.0/2.1) Into Bootloader Remove Battery Of Your Phone (Flare2.0/2.1) Then Return The Battery Of Your Phone HOLD VOLUME DOWN + Power Button Pag Lumabas Na Yung Logo Ng Flare Bitawan Na Yung VOLUME DOWN & Power Button


3.Plug Your Phone (Flare2.0/2.1) Dapat Naka Boot Sya Sa Bootloader Bago I Plug


4.Open Moborobo


5. Makikita Nyo Sa Moborobo Yung 1a2xxxx Pag Nakita Nyo Yun Mag Iinstall Driver Si Moborobo Wait Mo Lang Matapos Installing Driver Ni Moborobo Pag Tapos Na


6.Extract "Adb&Fastboot For Bootloop Etc (No Cwm)"


7.Install "minimal_adb_fastboot_v1.1.3_setup"


8.After Setup Is Finish "Check" Launch Minimal Adb And Fastboot


9.Type In The Minimal Adb And Fastboot "fastboot devices"


10.Dapat may Lalabas na Code Na Nakita NyoSa Moborobo Yung Serial Number Nyo 8 Numbers & Letters Ata Yun


11.Hanapin Nyo Yung Folder Ng Minimal Adb & Fastboot Then Paste Nyo Dun Yung Recovery Na Dinownload Nyo Kanina


12.Pag Nakita Nyo Na Yung Code TypeFor Clockworkmod Recovery


(Ito Yung Type Mo Kung Clockworkmod Recovery Dinownload Mo)


fastboot flash recovery recovery.imgFor MIUI Recovery


(Ito Yung Type Mo Kung MIUI Recovery Dinownload Mo)


fastboot flash recovery MIUIFix.img


Wait Matapos


Pag Tapos Na Remove Your Battery Tas Return Your Battery Then Boot To RecoveryHold Power


Button + Volume Up Para Mag Boot Sa Recovery Pag Nag Boot Sa Recovery!



Mag Flash Ka Na Ng Rom na Gusto Mo :) Enjooy :)


flare 2.0/2.1 stock rom

You do not have permission to view the full content of this post. Log in or register now.
 
Installing ClockWorkMod Recovery for Cherry Mobile Flare 2.0/2.1



Install BusyBox on your phone.
Open the BusyBox app. If it requests for the
Superuser access, Allow/Grant it. Under the "Install
BusyBox" tab, click the "Install" button located at the
bottom of the screen.
Download the CWM recovery and put it somewhere in
your sdcard.
Download and install Recovery Tools on your phone.
Open the Recovery Tools app. If it requests for the
Superuser access, just Allow/Grant it. A popup might
appear at the first launch, just click the "I know the
risk" button.
Click the "Flash Recovery" button.
Another popup would appear, enabling you to choose the
"Flash Options", click the "Other from Storage".
Now, locate the CWM recovery ( recovery.img ) that
you've downloaded a while ago. Select that recovery.img
A "Warning!" popup should appear, just click the "Yes,
please" button. It should flash the recovery.img and it
should be finished in just a few seconds.
A popup should appear again. To check if the flashing of
the recovery is successful, click "Yes, please" in this
popup. This will reboot your device into the CWM
Recovery.
If the flashing is successful, then you will see the
CWM Recovery. And you should see the CWM-based
Recovery v6.0.2.8 in the bottom and the top of the
screen. ( NOTE: Unfortunately, the CWM Recovery is inverted.
You might find a hard time using it, but you'll get used to it.)
Use the volume buttons to navigate up and down, and
the power button to select. You might want to select
the "reboot system now " for now, as we won't install
anything yet.
NOTE: You might experience the long wait after
selecting the "reboot system now " in the CWM
recovery. This is a bug in my CWM Recovery, but
it should still reboot, it will just take 1-3 minutes ...

download busy box here
You do not have permission to view the full content of this post. Log in or register now.
download the recovery.img here
You do not have permission to view the full content of this post. Log in or register now.
download recovery tool here
You do not have permission to view the full content of this post. Log in or register now.
 
Status
Not open for further replies.

Similar threads

Back
Top