What's new

Help usb flash drive detector help!!

Status
Not open for further replies.
what do you mean direct mo salpak yung usb hindi yun pwede kasi ang usb kailangan ng 5volts para gumana? or ung usb cable di nadedetect ng computer? punta kalang ng settings sa cp mo tapos check mo yung usb debugging :D
 
yan yung bilis nung cp mo, lahat kasi ng cp 3.7volts lang kaya hindi kayang iread ang usb unlike sa mga tablet na 5volts sya yun pwedeng maread ang usb,

cp= sdcard only
tablet= sdcard and usb
 
Try mo mag imbento balatan mo yung usb connector taz putulin mo yung red na wire and yung black na wire i direct mo sa battery na saktong 5volt
taz try mo na :D tandaan mo yung red and black wire lang ah kailangan mong putin yung wire na red and black papunta sa cp taz yung wire na papunta sa usb yun ang ikabit mo sa battery :D
 
Try mo mag imbento balatan mo yung usb connector taz putulin mo yung red na wire and yung black na wire i direct mo sa battery na saktong 5volt
taz try mo na :D tandaan mo yung red and black wire lang ah kailangan mong putin yung wire na red and black papunta sa cp taz yung wire na papunta sa usb yun ang ikabit mo sa battery :D
 
boss hindi po kaya eto ang ibig nyong sabihin
ke8A8GGIcv9Xj6orV9VsoCmvgZKqqNpSdfGI4_bRIcWz0=w300.png
[root] StickMount


Automatically mount and dismount USB sticks on various devices like the Galaxy Nexus, Nexus 7 and Nexus 10. The Nexus 4 is not supported - this is an issue with the device, not with StickMount !
!!! REQUIRES ROOT !!!

Various Nexus and "stock Android" devices do not automatically "mount" mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.

StickMount is known to work on many devices, but is built only with Nexus devices in mind.

Once StickMount is installed and you connect a USB stick with a "USB host / OTG cable", the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.

If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.

You do not have permission to view the full content of this post. Log in or register now.
 

Attachments

Status
Not open for further replies.

Similar threads

Back
Top