Closed Unified Firmware to openline myphone my28/s (Latest Update)

DESCRIPTION: Unified firmware was built in order to have an openline/standard firmware for the three versions of our device (My28/My28s/My28s-triband). Unified V4 is the compilation of all the fixes and some modifications of Unified V3..

FIRMWARE CHANGE LOG:

• NVitems from Miracle Box method included (suppose to improve signal)
• White-Screen Fix Included
• TWRP included
• Corrected dev blocks
• Some fixes and modifications on firmware files
• Some fixes and modifications on kernel files

ROM features/change log:

• Openline
• Deodexed/Zipaligned
• Debloated
• Rooted with SuperSU Pro
• Busybox installed
• Init.d supported
• Some apps was replaced with CM12.1 apps
• Pre-pâtched services.jar (disabled signature verification)
• Preinstalled and Preactivated ABS Tweaks
• Insert sim bug fixed
• Updated GAPPS

Note: Other modifications will be added soon.

FLASH AT YOUR OWN RISK! Follow the instructions accordingly.

Requirements:
∆Windows PC
∆A working data cable for android. If you have an original samsung data cable, then use it.

∆SPRD NPI USB Driver - You do not have permission to view the full content of this post. Log in or register now.

∆Upgrade Download Tool - You do not have permission to view the full content of this post. Log in or register now.

∆MyPhone My28/s Unified Firmware V4 (Revised-3) - Download, save to PC and extract using 7ZIP - 270.7 MB
You do not have permission to view the full content of this post. Log in or register now.

Stock Launcher for Unified v4 - Download and save to SDcard

Chooose your desired Stock Launcher:

×Launcher3 for Unified V4 - You do not have permission to view the full content of this post. Log in or register now.

×RevoLauncher for Unified V4 - You do not have permission to view the full content of this post. Log in or register now.

Settings black theme fix - Download and save to SDcard - You do not have permission to view the full content of this post. Log in or register now.

HOW TO FLASH?

1.Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)

2.Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)

3.After you open Upgrade Download, Click LOAD PACKET

4.Then find the extracted folder of C22J_MY28_20160418_V4.18_Unified_V4_By_Team28Devs_Revised3.pac and click the pac file (Wait for a few seconds until the pac file will load)

5.After loading the pac file, click START DOWNLOADING (GEAR ICON)

6.REMOVE battery and insert it back

7.Hold Vol+ and Vol- button together, then connect your phone to PC via USB
If you see "IN PROGRESS" in the Upgrade Download Tool, you can now release the Vol+ & Vol- button

8.Just wait for a few minutes. When flashing is "PASSED" It means that flashing is successful

9.Remove your phone from PC, remove battery and insert it back, and boot to Recovery Mode (TWRP). Hold power button then immediately hold vol+ button, after 2 sec release the power button while holding the vol+ button

10.In TWRP, tap Mount and check "cache", "Data", "System", "Micro SDcard". Tap Storage: and select Micro SDCard

11.Go back to TWRP's Home menu and tap Wipe - Advanced Wipe and check "Dalvik Cache", "cache", "Data". Then Swipe to wipe

12.Go back to TWRP's Home menu and tap Install. Locate Launcher3_Unified_V4.zip or RevoLauncher_Unified_V4.zip from your SDcard and install it

13.Go back to TWRP's Home menu and tap Install. Locate v3_v4_settings_black_theme_bug_fix from your SDcard and install it

14.Go back to TWRP's Home menu and tap Reboot - System

15.DONE! and wait for several minutes
===============
HAPPY FLASING!

-Special thanks to all the members of Team28Devs

God Bless you!!!!

================================

Thanks Boss!!

bkt po ayaw mag on phone pag press ko ng Vol + and Vol -

this is not good i have tested this,
* slow down your phone
* signal problem even in v3

Why is there low memory after flashing the rom?

hirap magdownload sa mega. and ive seen so many post regarding some problems na naencounter nila after nilang iflash ang rom na ito, do it at your own risk. goodluck..

yehey, it works. it's great. good job

Thanks Sir try ko sa Cp ko nasira e

pano po mag unroot, kasi pre rooted na yan, dami kasi bug sa v3.. insert sim card/ low signal/ medyo maghuhung yung phone..

Need root tama po

pa try po ...............

mark choowee uy said:

pano po mag unroot, kasi pre rooted na yan, dami kasi bug sa v3.. insert sim card/ low signal/ medyo maghuhung yung phone..

Click to expand...

Punta Po kayo sa General Settings ng Kingroot tas Uninstall Root Po ata yun Basta Nandun yun Haha Limot ko e

sure BAH TO NA INSTALLER

???
BAKA KASI MASIRA TUNG CP NA PINA OOPENLINE NG SUPERVISOR KO SAKIN.

digitalpound said:

this is not good i have tested this,
* slow down your phone
* signal problem even in v3

Click to expand...

no signal just like mine

where is the LOAD PACKET i can't see in the folder? please help me

Sa mga gustong i openline ang smartphone nila wag nyo na pong ituloy. maraming bug ang pac files. 256mb of phone storage instead of 2gb. at pag ni restart mo sya o ma restart ang phone mo balik ulit sa dati. kahit may mga inuninstall kana na mga apps pag nag restart babalik ulit. try and tested ko na to.

thanks pasubok nga

Yun lang pala,

bakit walang answer ang admins?
sa mga comment?

Salamat boss dito..