R
ravemastah
Guest
DISCLAIMER: IM NOT RESPONSIBLE FOR BRICKED OR BOOTLOOPED MODEMS, TRY THIS AT YOUR OWN RISK! If you point the finger at me for messing up your modem, I will laugh at you.
1. Download this firmware:You do not have permission to view the full content of this post. Log in or register now.
2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.
3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.
4. Click on upload and wait for the flashing to finish.
5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.
6. The device will boot again wait for your modem to complete its boot.
7. Unplug your modem's UTP cable and plug it again.
8. Check your LAN's gateway IP address it should be "192.168.254.1"
9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.
10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"
11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "You do not have permission to view the full content of this post. Log in or register now."
12. Check Telnet > LAN and click on apply.
13. Now download this script "You do not have permission to view the full content of this post. Log in or register now." it will change your admin password without the need of generating admin password.
14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".
15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"
16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!
ADVANTAGES:
You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote häçkers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords
DISADVANTAGES:
Wifi is not supported
VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://phc.onl/#forbidden#/nUKk3yL8TKM
Frequency Changer for SMART and GLOBE:
You do not have permission to view the full content of this post. Log in or register now.
1. Download this firmware:You do not have permission to view the full content of this post. Log in or register now.
2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.
3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.
4. Click on upload and wait for the flashing to finish.
5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.
6. The device will boot again wait for your modem to complete its boot.
7. Unplug your modem's UTP cable and plug it again.
8. Check your LAN's gateway IP address it should be "192.168.254.1"
9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.
10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"
11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "You do not have permission to view the full content of this post. Log in or register now."
12. Check Telnet > LAN and click on apply.
13. Now download this script "You do not have permission to view the full content of this post. Log in or register now." it will change your admin password without the need of generating admin password.
14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".
15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"
16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!
ADVANTAGES:
You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote häçkers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords
DISADVANTAGES:
Wifi is not supported
VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://phc.onl/#forbidden#/nUKk3yL8TKM
Frequency Changer for SMART and GLOBE:
You do not have permission to view the full content of this post. Log in or register now.
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.