For me this is the fastest tool for HUNTING or CHANGE bm622m MAC address - Clarkz
BM622m Toolkit v. 2.04.04 TUTORIALS
INGREDIENTS:
1. BM622m Toolkit by LAVABOY v.2.04.04
2. Supported WIMAX models BM622m 2012 / 2013
(For BM622m models - 2012 FW preferred, kindly downgrade at YOUR OWN RISK!) Search the Threads on how to do this
INTRODUCTION:
THE MAC CHANGER TAB
THE SOS (SNIPER ON STEROIDS) MAC SNIPER TESTER TAB
HOW TO USE:
[CHANGE MAC]
1. Plugin your Wimax Unit
2. Wait for the tool to Read current settings
-------->(You should be able to see your current settings in the display panel, IF NOT, check LAN connection!)
3. Set Default Gateway IP
-------->(for those with customized default gateway IP) IF your IP is default, you may skip steps 3 and 4.
4. Click Check (You should be able to see a prompt) > Click ok then > Refresh - Your current settings are now on Display
5. Set MAC Address > Set Frequency (Please choose the best freq. in your location) > Set domain > Click SET! Wait for the Tool to finish. New MAC address is now on the Display Panel
NOTE: - For the MAC address Kahit walang colon, OK LANG PO, the tool will automatically adjust this for you.
The WIMAX GUI will NOT reflect the changes until after reboot of the modem (Pero sa loob nyan changed na ang settings, VERIFY mo sa wimax account settings. No need to reboot, connected na yan using your chosen LIVE MAC!)
[MAC SNIPING] / SOS!
SUPPORTED SERIES (OLD AND NEW, ALL)!!!
NOTE: For Shareware versions, MAC sniping will automatically STOP once 3 LIVE MACs are found. Kindly reload / input a new MAC Range after the tool stops.
INCREMENT / DECREMENT METHOD
1. Choose INCREMENT OR DECREMENT
2. Input MAC RANGE
-------->(IMPT!: FOR NEW SERIES (34, E8, C8 ETC.) LAST HEXADECIMAL VALUE SHOULD BE 0, 4, 8, C PILI NA LANG KAYO)
3. Input Inc. /Decr. Value
-------->( FOR NEW SERIES ADVISABLE TO SET AT 4)
4. Set Number of Retries (select option acording to your preference)
------- >Higher value: increased reliaibility of LIVE MAC sniped, pero increased din ang sniping time
-------->Lower value : decreased reliability of LIVE MAC sniped, pero decreased ang total sniping time (mabilis!)
5. Select Test option (select option acording to your preference)
--------> Ping : High speed detection of live MACS, pero low reliability of MACs sniped
--------> Download 1MB file: increased reliability of LIVE MACs sniped, increased total MAC sniping time
--------> Basically mas malaki ang DL test file mas matagal pero mas siguradong LIVE MAC ang na SNIPE
6. Click Snipe Now!
You should be able to see something like this
NOTE: PRESS THE ESC BUTTON IF YOU WANT TO TERMINATE THE SNIPING SESSION. CLICK VIEW HISTORY OR ANY HISTORY BUTTON OF YOUR PREFERRENCE TO VIEW THE RESULTS
SNIPING VIA MAC LIST
FOLLOW THE INSTRUCTIONS BELOW:
NOTE: For Shareware versions, MAC sniping will automatically STOP once 3 LIVE MACs are found. Kindly reload a different MAC Range on the MAC list panel
credits to: Sir Lavaboy for the tool an[FONT=Verdana, Arial, sans-serif]d sir whiplashmd for tutorial
[/FONT]
Coming Tutorial : Bm622m 2013 Firmwares Downgrade!!!
BM622m Toolkit v. 2.04.04 TUTORIALS
INGREDIENTS:
1. BM622m Toolkit by LAVABOY v.2.04.04
2. Supported WIMAX models BM622m 2012 / 2013
(For BM622m models - 2012 FW preferred, kindly downgrade at YOUR OWN RISK!) Search the Threads on how to do this
INTRODUCTION:
THE MAC CHANGER TAB
THE SOS (SNIPER ON STEROIDS) MAC SNIPER TESTER TAB
HOW TO USE:
[CHANGE MAC]
1. Plugin your Wimax Unit
2. Wait for the tool to Read current settings
-------->(You should be able to see your current settings in the display panel, IF NOT, check LAN connection!)
3. Set Default Gateway IP
-------->(for those with customized default gateway IP) IF your IP is default, you may skip steps 3 and 4.
4. Click Check (You should be able to see a prompt) > Click ok then > Refresh - Your current settings are now on Display
5. Set MAC Address > Set Frequency (Please choose the best freq. in your location) > Set domain > Click SET! Wait for the Tool to finish. New MAC address is now on the Display Panel
NOTE: - For the MAC address Kahit walang colon, OK LANG PO, the tool will automatically adjust this for you.
The WIMAX GUI will NOT reflect the changes until after reboot of the modem (Pero sa loob nyan changed na ang settings, VERIFY mo sa wimax account settings. No need to reboot, connected na yan using your chosen LIVE MAC!)
[MAC SNIPING] / SOS!
SUPPORTED SERIES (OLD AND NEW, ALL)!!!
NOTE: For Shareware versions, MAC sniping will automatically STOP once 3 LIVE MACs are found. Kindly reload / input a new MAC Range after the tool stops.
INCREMENT / DECREMENT METHOD
1. Choose INCREMENT OR DECREMENT
2. Input MAC RANGE
-------->(IMPT!: FOR NEW SERIES (34, E8, C8 ETC.) LAST HEXADECIMAL VALUE SHOULD BE 0, 4, 8, C PILI NA LANG KAYO)
3. Input Inc. /Decr. Value
-------->( FOR NEW SERIES ADVISABLE TO SET AT 4)
4. Set Number of Retries (select option acording to your preference)
------- >Higher value: increased reliaibility of LIVE MAC sniped, pero increased din ang sniping time
-------->Lower value : decreased reliability of LIVE MAC sniped, pero decreased ang total sniping time (mabilis!)
5. Select Test option (select option acording to your preference)
--------> Ping : High speed detection of live MACS, pero low reliability of MACs sniped
--------> Download 1MB file: increased reliability of LIVE MACs sniped, increased total MAC sniping time
--------> Basically mas malaki ang DL test file mas matagal pero mas siguradong LIVE MAC ang na SNIPE
6. Click Snipe Now!
You should be able to see something like this
NOTE: PRESS THE ESC BUTTON IF YOU WANT TO TERMINATE THE SNIPING SESSION. CLICK VIEW HISTORY OR ANY HISTORY BUTTON OF YOUR PREFERRENCE TO VIEW THE RESULTS
SNIPING VIA MAC LIST
FOLLOW THE INSTRUCTIONS BELOW:
NOTE: For Shareware versions, MAC sniping will automatically STOP once 3 LIVE MACs are found. Kindly reload a different MAC Range on the MAC list panel
credits to: Sir Lavaboy for the tool an[FONT=Verdana, Arial, sans-serif]d sir whiplashmd for tutorial
[/FONT]Coming Tutorial : Bm622m 2013 Firmwares Downgrade!!!