1. Welcome to PHCorner Forums. Take a moment to Sign up and gain unlimited access and extra privileges that guests are not entitled to, such as:

    All that and more! Registration is quick, simple and absolutely free. Join our community today!

Tutorial Simple PC Errors And Their Simple Solution's

Discussion in 'Windows Tools & Tips' started by La Freak, Nov 10, 2013.

  1. La Freak

    La Freak Support Team Staff Member Support Team

    Here some common PC errors and the solutions for them...

    1. MONITOR LED IS BLINKING
    Check all the connections like Monitor Cable, Data
    cables,RAM, Display Card , CPU connections.

    2. CONTINUOS THREE BEEPS
    Problem in RAM Connection.

    3. THREE BEEPS ( 1 Long 2 Short)
    Problem in Display Card Connection

    4. THREE LONG BEEPS PERIOD WISE
    Problem in BIOS or RAM (Basic Input Output System)

    5. CONTINUOS NON-STOP BEEPING
    Key Board Problem (I.e.; Some Key is pressed for
    Longer time)

    6. FDD LED IS GLOWING CONTINUOSLY
    Data cable to be connected properly (twisted cable).

    7. NO DISPLAY ON THE SCREEN AT ALL
    Hard Disk cable connected wrongly. Connect rightly
    seeing the Red mark (Faces power supply) and then
    Restart.

    8. POWER LED IS OFF
    a. Check main power cord
    b. Check S.M.P.S.
    c. Check Mother Board connection

    9. SHOWING CMOS ERROR
    Replace 3 Volt battery of Mother Board . Set Original
    Settings Manually.(Refer CMOS Setup chart)
    Enter your search termsSubmit search form

    10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT
    WORKING PROPERLY
    Check Power cord of FDD , Data Cables , set CMOS &
    Finally the Check drive.

    11. SHOWING HDD ERROR OR HARD DISK FAILURE
    a. Check Power Cord
    b. Check connection of HDD
    c. Check Data cable
    d. Check Hard Disk parameters in CMOS or Auto
    detecting Setting Partitions by Fdisk Command, then
    format it to set track 0.

    12. MOTHER BOARD HANGS DUE TO UNSTABILIZED
    POWER SUPPLY
    a. Check S.M.P.S
    b. RAM not functioning properly.
    c. Software problem (due to using pirated software)
    d. CPU fan not functioning properly.

    13. DANCING SCREEN
    a. Check Display card connection
    b. Virus Problem
    c. Video Memory Problem

    14. SHAKING SCREEN
    a. Earthing problem
    b. Magnetic waves comes around.

    15. CPU CABINET SHOCK
    a. Check Earthing
    b. Check main power cord.

    16. NON-SYSTEM DISK ERROR
    a. Floppy Drive having different disk (Non-Bootable
    Disk) OR CMOS Parameters for Hard Disk may not be
    set properly.
    b. Hard Disk Partitions may not be created.
    c. Hard Disk may not be formatted.

    17. MISSING OPERATING SYSTEM
    The System files missing namely Ie; command.com} -
    User File IO.SYS & MS_DOS.SYS } - Hidden Files. These
    above three files required for Start up of the system
    that can be transferred by using SYS C: Command OR
    While the time of formatting by using Format c:/u/s

    18. MISSING COMMAND INTERPRETOR
    May the file Command.com is corrupted OR Infected
    by Virus OR Some one has Erased it.

    19. SHOWING I/O ERROR
    a. The type of Hard Disk in CMOS may not be set
    properly.
    b. Operating system used for formatting is not valid

    20. SHOWING DIVIDE OVER- FLOW MESSAGE
    a. May some Directories or Files crash with other files.
    b. Use CHKDSK/F or SCANDISK Command to correct it.

    21. HARD DISK MAKING NOISE WHILE PROCESSING
    a. Unstabilized power supply.
    b. Check for Loose Contact.
    c. Do not use Y Connectors for Hard Disk.
    d. It may create Bad Sector OR Weak Hard Disk.

    22. HARD DISK HANGS WHILE PROCESSING
    Check for Bad Sector by using CHKDSK or SCANDISK
    Command. If found format the Hard Disk and set
    Partition before that area.(This is the only procedure
    to use Hard Disk with Bad Sector) OR (To avoid Bad
    Sectors use Standard Power Supply)

    23. HARD DISK NOT DETECTED
    a. Check Power Connector
    b. Check Data Cables
    c. Check Jumpers

    24. PARTITION NOT SHOWN
    Operating System where the Hard Disk formatted is
    not supported with present Mother Board. For Eg:
    Hard Disk formatted with Pentium System will hide
    their partitions for 486 System.

    25. MMX/DLL FILE MISSING
    May the above files may be corrupted due to power
    failure or Virus. Make available above files from other
    Computer. OR Reinstall Windows 98 Operating
    System. (This procedure will not make any effect on
    existing Data).

    26. WINDOWS REGISTRY ERROR
    This will happen due to sudden ON/OFF of the
    system. Final solution is to Reinstall Operating System.

    27. DISPLAY COLOUR DOES NOT MATCH
    a. Configure Display Card properly with their CD.
    b. The Standard setting for Windows is set it to
    800x600 for better performance.

    28. UNKNOWN DEVICE FOUND
    May the Driver utility is not provided with operating
    system . Insert Driver CD and install software for the
    above Device..​
     
  2. thanks for info :))
     
  3. big thanks po for the info
     
    ThisGuyKnowHowToLove likes this.
  4. nice one thanks for the info
     
Tags / Keywords: