What's new

Closed Pa TUT naman,Bm622M Cant access GUI and TELNET,Blinking lang

Status
Not open for further replies.

Senpai

Conqueror
Established
Pa help dito, diko maopen ang web gui 192.168.254 pati yung telnet nya, diko maopen, enabled na telnet client ko PACKAGE 622M 2013, natry ko narin mag winspreader. still diko parin maopen,

OTHER TIPS ans SOLUTION naman mga BOSS
 
naku naremote ka ata try mo magflash ulit ng 22m then pag gumana downgrade mo na ....kung wala talaga paayos mo na ... yung ic lang naman yata papalitan dyan...
 
Last edited by a moderator:
huawei_bm622m_wimax_cpe_4g_router.jpg
downgrade your BM622m 2013 to 2012 [SOLUTION]

his tutorial will teach you how to downgrage your Globe Huawei BM622m package 2013.
There are several reason why you need to downgrade your device.

1.) For you to change the mac address
2.) Package 2012 is supported by the You do not have permission to view the full content of this post. Log in or register now.



To start with, you will be needing these requirements:
1.) You do not have permission to view the full content of this post. Log in or register now. << hanap ka nito sa mga topic ko meron naka upload na gntong files dun
2.) You do not have permission to view the full content of this post. Log in or register now. 2012 firmware for BM622m (LINK WAS FIXED)

Procedure:
1.) Turn OFF your WiFi or unplug your networking cable from your PC
2.) Extract the You do not have permission to view the full content of this post. Log in or register now. on your desktop and double click WinSpreader.exe
3.) Locate the firmware which you have downloaded and select your LAN or Ethernet Adapter (gagamitin natin ay cable para iwas sira)
4.) Then click start.
5.) Plug a networking cable to your BM622m and plug it to your PC. (NOTE: MARAMI ANG NAGKAKAMALI DITO. DAPAT PO DI PA NAKASAKSAK ANG MODEM NYO SA ADAPTOR)
1.jpg
6.) Plug your power adaptor (YUN, EXCITED NA SI APO)
2.jpg
7.) You will see the signal led running an indication that the firmware is being burned to its board. (Wait for about 2 minutes to finish)
8.) Kapag 5 LED ang nag bi-blink, click STOP at hugutin ang power adaptor ulit.
9.) Mag login sa GUI 192.168.254.1 | user |0SlO0510 > Restore Default (Mag re-restart ang modem mo)
Or just simply press the physical reset button of your wimax.
10.) BOOM, 2012 package na ang BM622m mo :) Congratz!

PAG DI KAYA ETO NA GAWIN MO..!!!
 

Attachments

Mga boss, na downgrade ko na sya sa 2012 using winspreader, kaso ang nangyari ganun padin, still cant access web gui at telnet,blinking parin sya, Nagtry narin ako other solution like BACKDOOR to 192.168.15.1 naaccess ko SMART GUI kaso ayaw gumana ng default na Admin Admin Smart Smart tsaka yung Telnet nya iba rin. DI KAYA REPAIRMAN NA TO?? or MAY OTHER SOLUTION PA?? salamat po sa sagoton the other thread Solution po kase , BACKDOOR to 192.168.15.1 SMART GUI set mac ng working,, then re Upgrade to 622m 2013 or 2012 ulit, Problema naman, yung Admin access ng GUI at TELNET :cry: 
Open ports of 192.168.254 ayaw parin, SUKO NA AKO sa 622m:nailbiting: :cry:
 
Last edited by a moderator:
Mga boss, na downgrade ko na sya sa 2012 using winspreader, kaso ang nangyari ganun padin, still cant access web gui at telnet,blinking parin sya, Nagtry narin ako other solution like BACKDOOR to 192.168.15.1 naaccess ko SMART GUI kaso ayaw gumana ng default na Admin Admin Smart Smart tsaka yung Telnet nya iba rin. DI KAYA REPAIRMAN NA TO?? or MAY OTHER SOLUTION PA?? salamat po sa sagoton the other thread Solution po kase , BACKDOOR to 192.168.15.1 SMART GUI set mac ng working,, then re Upgrade to 622m 2013 or 2012 ulit, Problema naman, yung Admin access ng GUI at TELNET :cry: 
Open ports of 192.168.254 ayaw parin, SUKO NA AKO sa 622m:nailbiting: :cry:
change firmware to GREEN PACKET pag na reset mona balik mo sa 622m firmware
 
Last edited by a moderator:
sino po pwede mag teamviewer sakin para maayos po yung 22m ko? ip 192.168.254.1 may internet parin pero no gui/telnet/ signal lights wala lahat willing to pay load basta maayos po please
 
Dear Senpai,

Since 2 years have passed since the last reply in this thread, I am locking it to prevent necroposting. Feel free to start a new thread or contact any forum staff if you want this to be reopened.

Thread closed.
 
Status
Not open for further replies.
Back
Top