What's new

Help Is There Anyone Can Help me.!!

Status
Not open for further replies.

Zero Raven

Honorary Poster
PHCitizens pwede po ba patulong.. kasi po hindi ko po alam kung ano sira ng cp ng tito ko.. unit po Samsung S2 sinubukan niya po kasi i-encrypt tapos po may nagpop-up "need to put password lock to secure files" tapos ok na kaso sinubukan niya naman i-decrypt kasi ayaw niya daw ng may password lahat.. tapos nung nafinish na po yung pag-decrypt hindi na siya nag-open as normal.. Wala na po lumalabas kahit turn on and off yung cp..

picture000.jpg
picture001.jpg


sana po matulungan niyo ko.. salamat po.!!
 

Attachments

nahanap ko na solosyon boss iadd ko dito wait...

Samsung i9000 galaxy s tmpa
done sa hard reset...


ss:
IMG_0115_zps34bab2c4.jpg


Code:
SOLUTION
HARD RESET
PRESS AND HOLD VOLUME UP
AND POWER
KEEP PRESSING THESE TWO
BUTTONS+PRESS POWER BUTTON
FOR 2-3 SEC
RELEASE POWER BUTTON BUT
KEEP PRESSING VOLUME UP AND
HOME BUTTONS
WITH VOLUME DOWN SELECT
WIPE DATA/FACTORY RESET
SELECT IT BY PRESSING HOME
BUTTON
SCREENSHOTS

IMG_0116_zps237a0419.jpg

IMG_0118_zpsbcd4700f.jpg


IMG_0118_zpsbcd4700f.jpg


IMG_0119_zps5dbadbb4.jpg


IMG_0120_zps1fd63b56.jpg


yan po boss try and try boss kung di yan makuha need po yan iflash by odin.
 

Attachments

pm mo na lang ako kung working o hindi sa technician 500p pag paayos nyan dito libre stuck sa logo kasi try and di pwedeng walang hard reset yan.kung talagang not working flash to recovery via odin mangyayari nyan wait din tayo sa ibang ka phc help team baka may odin sila naka android lang ako wala ako pc. just helping boss. :)
 
How to use Odin 3.07

First you need to download the zip file from the links given below. Then you need to extract the files from the zip folder. You can save this file anywhere as there is no specific location where you need to save these files.

Next you need to connect your android smartphone to the computer using a USB cable. Then switch off your phone for 30 seconds and then switch it on. Open the ODIN software that you just installed on your system. Once the window opens check the options based on your requirement. Click on ‘auto reboot’ and check ‘PIT’. PIT is another option for downloading files on ODIN, it is Partition Information Table. If you select this option, then the *.pit files that are available in the firmware upgrade can be browsed by you. Then select the .pit file you need to upgrade your firmware. Then press Start. Your phone will be upgraded and automatically rebooted, once the process is complete.

Odin 3.07 --> You do not have permission to view the full content of this post. Log in or register now.
 
Update Galaxy S2 GT I9100 to Official Jelly Bean 4.1.2 XWLSJ OS- Guide

  1. Download Samsung KIES fromYou do not have permission to view the full content of this post. Log in or register now., and install the proper drivers for your Samsung Galaxy S2 device, if you already have installed the compatible drivers, you can skip this step.
  2. Download the ODIN app from You do not have permission to view the full content of this post. Log in or register now. and install it in your PC
  3. Download the Official Jelly Bean 4.1.2 XWLSJ OS update file from You do not have permission to view the full content of this post. Log in or register now. and extract the same in your PC.
  4. Open ODIN application from your computer.
  5. Power off your S2 device and reboot the same into Download Mode, to do this reboot the device by pressing and keeping the Power and Volume buttons simultaneous.
  6. Connect your S2 device to the PC using the USB cable for doing that.
  7. In the ODIN app, you need to be notified with the ID:COM yellow or blue and the “added” message is displayed and available. That’s give you the accord to begin the flashing process. If not, close ODIN, after that disconnect your S2 device from the computer and reinstall the drivers again in your PC after you reinstall the drivers repeat the procedure from the beginning.
  8. Now, from the ODIN app select the “PDA” option.
  9. Search and pick the downloaded update which you downloaded and extracted previously.
  10. Now, in the ODIN app click on “Start” button.
  11. Now wait until the flashing process is done and you’re notified by a “pass” message in the ODIN app interface.
  12. Disconnect your S2 device by removing the USB cable.
  13. Reboot your Samsung S2 device.
SOURCE: You do not have permission to view the full content of this post. Log in or register now.
*this is the best solution to your problem sana makatulong sayo (y) *
 
Status
Not open for further replies.

Similar threads

Back
Top