1. Welcome to PHCorner Forums. Take a moment to Sign up and gain unlimited access and extra privileges that guests are not entitled to, such as:

    All that and more! Registration is quick, simple and absolutely free. Join our community today!

Tutorial How to run a WQHD monitor at 2,560 x 1,440 via HDMI on an Intel HD3000, HD4000

Discussion in 'Windows Tools & Tips' started by Jeanh, Apr 16, 2016.

  1. How to run a WQHD monitor at 2,560 x 1,440 via HDMI on an Intel HD3000, HD4000

    [​IMG]

    The rise of affordable WQHD monitors like the Please or Register to view links or Please or Register to view links has made it increasingly enticing to try and run not one but two of those displays on a laptop. This is exactly what we have tried to do for ages but without any luck until now.

    I work on a Please or Register to view links, possibly one of the best Ultrabooks ever launched. It is affordable (was available for under £500), weighs just over 1Kg, is 16mm thick but somehow still manages to pack VGA, HDMI, two USB 2.0 AND a USB 3.0 ports, a card reader and an RJ45 connector.



    We connected our first WQHD display, a Digimate model, through the laptop’s VGA port, without any additional drivers/hack. Some purist might be horrified by the prospect of running a display with a 2,560 x 1,440 resolution via an analogue connector but at least it works. Connecting the second monitor is where things become tricky.

    The Z830 offers USB 3.0 and HDMI, both of which should, in theory be capable of driving a WQHD display. But if you connect your panel straight to the Z830, which runs on a Sandy Bridge CPU (HD3000 GPU) via HDMI, the maximum resolution reached will be 1,920 x 1,080 pixels, which on a 27in panel, is rather ugly.

    So below are the four steps we took to get the WQHD monitor to run on a HDMI port (we’re assuming that your monitor does have a HDMI port to start with).

    (a) Upgrade your Intel video driver to the latest version (v9.17.10.2875) and open the Intel Graphics and Media control panel.

    (b) Make sure you’re running in the “Advanced Mode”. Click on the “display” tab followed by “custom resolutions”, a warning sign will pop up. Just click yes to continue.

    Please or Register to view links



    (c) You will be presented with another window that prompts you to enter “width”, “height” and “refresh rate” values. Change the monitor in the pull down menu and fill the empty fields with the following numbers 2560, 1440 and 40. That translates into a data transfer rate of 4.72Gbps; a higher refresh rate (i.e. a number bigger than 40) will bring up a message informing you that you’ve exceeded the maximum bandwidth. So the key is to run the monitor at a low refresh rate, which shouldn’t be an issue if you don’t plan to do any gaming and stick to office tasks. Press on apply and then ok to validate your choice.

    Please or Register to view links

    (d) After that, restart your computer, bring up the “screen resolution” menu, select the appropriate menu and change the resolution to the maximum permissible. Since you’ve added a new value via the Intel GM control panel, it should, in theory, appear in the “resolution” sliding menu. Just press apply followed by OK and your screen will flicker for a few seconds before hopefully moving to the higher resolution.

    Please or Register to view links


    And voilà! Job done. Two monitors running at 2,560 x 1,440 pixels. Note that the trick should also work on an Intel HD4000 and, in theory, with an Intel HD2500 GPU as well.

    Please or Register to view links
     
Tags / Keywords: