What's new

Help Help naman po san tulungan nyo ako

Status
Not open for further replies.
help s wimax ko di ko sadya na update ko finware nya tapo kicancel ko yun ayaw na gumana ng wimax modem koh bm6221i po cya help namn po
 
di ako makapasok sa gui kasi yung net ko indentifiying lng ayaw mag tuloipag nag 192.168,254.1 eror po ayaw kasi nga po notconected yung modem ayaw kumonektapos bar ng ilaw 5 tapos 0 lng yun lng
 
Last edited by a moderator:
OMG! :eek: di pa ako naka encounter ng ganito. sana naman hindi masira.

Mas ok sana kung makakapasok ka sa gui para makapag restore ka ng firmware. :cry:
 
go to CMD, type in arp -a the print screen mo, post mo dito, tsaka ipconfig /all print screen morin post mo dito, dun mo ka kumuha ng screenshot sa ipv4 sa ipconfig /all para matulungan kabaka kase firmware brick na yan, or 169 ip
 
Last edited by a moderator:
go to CMD, type in arp -a the print screen mo, post mo dito, tsaka ipconfig /all print screen morin post mo dito, dun mo ka kumuha ng screenshot sa ipv4 sa ipconfig /all para matulungan kabaka kase firmware brick na yan, or 169 ip
team viewer teo sir
 
Last edited by a moderator:
go to CMD, type in arp -a the print screen mo, post mo dito, tsaka ipconfig /all print screen morin post mo dito, dun mo ka kumuha ng screenshot sa ipv4 sa ipconfig /all para matulungan kabaka kase firmware brick na yan, or 169 ip
di ako makapg print scren sa lappy nakikilappy lng alp ee hehe
 
Last edited by a moderator:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Dave>arp

Displays and modifies the IP-to-Physical address translation tables used by
address resolution protocol (ARP).

ARP -s inet_addr eth_addr [if_addr]
ARP -d inet_addr [if_addr]
ARP -a [inet_addr] [-N if_addr] [-v]

-a Displays current ARP entries by interrogating the current
protocol data. If inet_addr is specified, the IP and Physical
addresses for only the specified computer are displayed. If
more than one network interface uses ARP, entries for each ARP
table are displayed.
-g Same as -a.
-v Displays current ARP entries in verbose mode. All invalid
entries and entries on the loop-back interface will be shown.
inet_addr Specifies an internet address.
-N if_addr Displays the ARP entries for the network interface specified
by if_addr.
-d Deletes the host specified by inet_addr. inet_addr may be
wildcarded with * to delete all hosts.
-s Adds the host and associates the Internet address inet_addr
with the Physical address eth_addr. The Physical address is
given as 6 hexadecimal bytes separated by hyphens. The entry
is permanent.
eth_addr Specifies a physical address.
if_addr If present, this specifies the Internet address of the
interface whose address translation table should be modified.
If not present, the first applicable interface will be used.
Example:
arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry.
arp -a .... Displays the arp table.

C:\Users\Dave>
 
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Dave>ipconfig

Windows IP Configuration


Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::6c7f:530:59d1:7c98%12
IPv4 Address. . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::68ad:e3c3:d484:478e%11
Autoconfiguration IPv4 Address. . : 169.254.71.142
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

C:\Users\Dave>
 
arp -a po at ipconfig /all yang dalawang yan :D pag kase nag upgrade ka, pansinin mo nakalagay dun, caution firmware brick kaya wag kakalikutin :D
 
Status
Not open for further replies.
Back
Top