1. Welcome to PHCorner Forums. Take a moment to Sign up and gain unlimited access and extra privileges that guests are not entitled to, such as:

    All that and more! Registration is quick, simple and absolutely free. Join our community today!

[help] bm622i blinking wimax signal

Discussion in 'WiMAX, DSL Questions' started by reymond aglipay, Jul 11, 2014.

  1. ask lang ako ng help, pag open ko kasi kagabi nag blink na lang wimax signal, di na din ako makaconnect sa kanya.

    thanks
     
  2. Lift

    Lift Support Team Staff Member Support Team

    disconnected mac lang yan sir, pero panong di maka connect?
     
  3. try ko kasi i access 192.168.254.1, di ko na maaccess.. kahit mag static ako ng ip sa pc ko
     
  4. try mo ito boss sa cmd arp -a
     
  5. Lift

    Lift Support Team Staff Member Support Team

    mag post ka sir dito ng print screen ng
    open CMD type ipconfig /all
    tas CMD type arp -a

    para malaman namin :D
     
  6. 169 na ata yan ?
     
  7. tama po 169 na po.. ano kayang gagawin ko dun
    eto na po screen shot [​IMG]
     
  8. same problem po. anu po ang posible solution?
     
  9. Mister M

    Mister M PHC Master Established

    bale ts, walang winspread sa bm622i for dv at bm622m lang sya,
    bale gawin mo kung okay ka sa static ip at hindi sya 169 ip,pag default na gateway nya
    gamit ka nalang ng backdoor para makapag change mac ka parin ng live. dimo na kelangan ng open gui at open telnet na accessible, butas na yan sa Backdoor use this Please or Register to view links <~ Vip Hunter Wimax tool 3.0 Modified with Backdoor from my thread

    heres the step by step,

    1. use that tool sa change mac, telnet web settings default.
    2. Important na live mac ang isasalpak mo.
    3. punta ka sa mac changer at ichange mac
    4. Important habang nagcchange mac yan, may lalabas dyang terminal upgrader
    Hayaan molang at wag gagalawin, Bakit? habang bukas ang terminal upgrader, nag aask to sa Device to force access the telnet attachFull24500 so makakapag change mac ka kahit patay ang telnet nyan.
    5. wait kalang around 10 minutes,kase matagal talaga mag change mac using that procedure
    6.after nyan mag coconect na yan.

    credit to Sir Lift...

    or ito din try mo pasok dito

    Please or Register to view links
     
    yevrah0610 and furfang like this.
  10. Mister M

    Mister M PHC Master Established

    try mo yang post ko na nasa taas mo baka gumana yang laroan mo
     
  11. ok po sir tatry ko .. thanks sana gumana hehe
     
    Last edited: Nov 19, 2014
  12. Mister M

    Mister M PHC Master Established

    bawal po text na sulat baka ma ban kayo niyan
     
  13. Bonekiller

    Bonekiller No Fear Staff Member Moderator

    Same 169 ip din ang bm622m ko :mad: wala na naubos na pasensya ko sa pasok baon sa 169 na yan :LOL: di effective ang winspread 1 week ko na inayus no luck pa din kaya ginawa ko hinampas ko na sa pader :cool:nagbakasakaling maayus pero lalo nasira 22m ko :ROFLMAO:
     

    Attached Files:

    You must or Register to view Attachment.
    gyvz and Ma3 like this.
  14. Mister M

    Mister M PHC Master Established

    follow the instructions

    1.set static ip from the last firmware bago ma remote eg. green panget is 10.1.1.254 or 22m 2012 192.168.254.1 basta default ip ng last firmware na gamit nyo

    2.open winspreader/choose exact firmware na gagamitin nyo sakin i use gp

    3. start winspreader

    4.plug in wimax

    5.after 1 minute unplug wimax/ after 10 secons plug ulit.

    6.eto na ang trick

    7.observe every 2 minutes kung mag didisco ang signal lights kung hindi every 2 minutes unplug/plug ang wimax until mag disco, sya be patient.

    minsan may lalabas na error na "windows has detected an ip address conflict" ibig sabihin pasok na ung firmware kaya ngiti kana konti. pero minsan wala lumalabas na ganyan pero pumapasok ung firmware

    8.note:kapag lumabas ung "windows has detected an ip address conflict" set nyo na ipv4 sa obtain an ip address automatically.

    note:pag 22m ang firmware na pinasok mo dapat 1,4and5 signal led's ang iilaw pag gp naman pag tapos na ang firmware uploading parang tulala bukas lahat ng signal led's

    9.then disable network adapter/enable

    go to cmd and ipconfig

    look kung ok na ang ip and accessible na ang gui

    pag accessible na gui telnet agad use this commands

    telnet 192.168.254.1 or 10.1.1.254 or last firmware telnet password


    Firefly

    $P4mb1h1r4N4m4nT0!!

    apinfo > /etc/default.cfg

    sncfg commit

    sncfg reset

    sncfg default

    reboot

    next hard reset

    next problema nalang ay vintage time. at maraming problema ang na remote na 22m ako tiis sa green panget kahit ma remote no disconnect naman.

    note: may remoted na 22m na di na magagawa. ung signal leds ilaw lang ng ilang ayaw pumasok ng firmware at auto disable ang lan after 1 min tapos wala na.
     
    Last edited: Nov 19, 2014
Tags / Keywords: