What's new

Closed BM622M Remoted (HELP ME sa mga pro jan)

Status
Not open for further replies.
J

Jck-Frost

Honorary Poster
Hi guys pa help naman !

BM622m 2012 modem ko . nag nenet lang ako kagabi pagtingin ko biglang nawalan ng net .
tapos nag ipconfig ako . nakita ko na 169 na yung ip ko (Means remoted)

nag try ako maghanap ng tutorial sa kahit saan . as in kahit saan talaga .

halos lahat ng tutorial puro nakikita ko success sila .

ganito po ang ibig kong sabihin . yung sakin kase kapag pinaflash ko . yung lan yung nag biblink . may nakita ako na tut. normal lang daw yun . pero sakin hindi . kase sinunod ko naman ng maiigi procedure . ayaw parin . hindi tumitigil pag biblink ng lan .

help naman guys para di ako mawalan ng pagasa :'( , kakabili ko palang po kase ng modem at mac tapos gento na please :(​
 
Sort by date Sort by votes
jackfrost0908 said:
Hi guys pa help naman !

BM622m 2012 modem ko . nag nenet lang ako kagabi pagtingin ko biglang nawalan ng net .
tapos nag ipconfig ako . nakita ko na 169 na yung ip ko (Means remoted)

nag try ako maghanap ng tutorial sa kahit saan . as in kahit saan talaga .

halos lahat ng tutorial puro nakikita ko success sila .

ganito po ang ibig kong sabihin . yung sakin kase kapag pinaflash ko . yung lan yung nag biblink . may nakita ako na tut. normal lang daw yun . pero sakin hindi . kase sinunod ko naman ng maiigi procedure . ayaw parin . hindi tumitigil pag biblink ng lan .

help naman guys para di ako mawalan ng pagasa :'( , kakabili ko palang po kase ng modem at mac tapos gento na please :(​
Click to expand...

Wrong section!

Read this for reference: https://phcorner.net/t/guide-in-posting-a-new-topic-thread.120307/
 
Upvote 0 Downvote
boss kapag nag reflash ka, click start muna bago mo saksak modem mo sa outlet.
pag nag blink na ng sabay-sabay yung signal, ayun patayin mo at paandarin mo ulit modem mo. sigurado okey na yan..
 
Upvote 0 Downvote
jackfrost0908 said:
paps anyways... yung sinasabi nyo pong pag nag blink lahat. ano yun sa umpisa palang ? kapag nag blink ng sabay sabay yung signal led at tel led ?
Click to expand...
boss. kapag nag blink ang signal ng modem mo 12345 or 54321 ng isa-isa, nag iistart na mg flash yun. pag nag blink ng sabay ang signal, ibig sabihin, success na yung flashing...

by the way, yung signal lang boss..
 
Upvote 0 Downvote
pag unang bukas ko sir. nag sasabay sabay yung blink ng tel led at signals as in sabay sabay . tapos biglang mawawala then pagikakabit kona lan sa pc . umiilaw na yung lan led . kaso 169 tsaka matagal mag basa,
 
Upvote 0 Downvote
Fix Restore your modem settings

Continues LAN and Ready on Status (Normally this must be connecting not Ready)
1. Get a Winspreader and Smart v7 firmware
2. Open a Winspreader browse the Smart v7 firmware Hit start.
3. Plug your Modem Power and Lan Cable the wait a few minutes.
4. check the web GUI , type the 192.168.254.1 on your browser
5. If you Gui Change to Smart.

upload_2014-8-3_9-20-32.jpeg

Open telnet 192.168.254.1
login: mt7109
password: wimax
sncfg dset ADMIN_NAME admin (Enter)
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
sncfg commit (Enter)
/factoryreset.sh (Enter)


NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1


6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
Open a browser type 192.168.15.1
log in user :admin pass:smart

7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
wait 10 to 15 minutes slowly but surely effective flashing.

8. After done Upgrade it will reboot hit that reboot and wait.

9. reboot done check ip still 192.168.15.1 (smart)
Open a browser type 192.168.15.1 then you will see PINK page with error link is like this You do not have permission to view the full content of this post. Log in or register now.

Now open a telnet again
Telnet 192.168.15.1

Login: Firefly
Pass: $P4mb1h1r4N4m4nT0!!
/factoryreset.sh (enter)


NOTE: wag na wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.


10. dahil nag factory reset tayo automatic walang telnet yan log in ka
username: user
password: 0SlO051O
Go to You do not have permission to view the full content of this post. Log in or register now. para ma access telnet niyo
CHECK TELNET and click apply.
 
Upvote 0 Downvote
badburn said:
Fix Restore your modem settings

Continues LAN and Ready on Status (Normally this must be connecting not Ready)
1. Get a Winspreader and Smart v7 firmware
2. Open a Winspreader browse the Smart v7 firmware Hit start.
3. Plug your Modem Power and Lan Cable the wait a few minutes.
4. check the web GUI , type the 192.168.254.1 on your browser
5. If you Gui Change to Smart.

upload_2014-8-3_9-20-32.jpeg

Open telnet 192.168.254.1
login: mt7109
password: wimax
sncfg dset ADMIN_NAME admin (Enter)
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
sncfg commit (Enter)
/factoryreset.sh (Enter)


NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1


6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
Open a browser type 192.168.15.1
log in user :admin pass:smart

7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
wait 10 to 15 minutes slowly but surely effective flashing.

8. After done Upgrade it will reboot hit that reboot and wait.

9. reboot done check ip still 192.168.15.1 (smart)
Open a browser type 192.168.15.1 then you will see PINK page with error link is like this You do not have permission to view the full content of this post. Log in or register now.

Now open a telnet again
Telnet 192.168.15.1

Login: Firefly
Pass: $P4mb1h1r4N4m4nT0!!
/factoryreset.sh (enter)


NOTE: wag na wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.


10. dahil nag factory reset tayo automatic walang telnet yan log in ka
username: user
password: 0SlO051O
Go to You do not have permission to view the full content of this post. Log in or register now. para ma access telnet niyo
CHECK TELNET and click apply.
Click to expand...
try ko sir wait .for the 3rd time
 
Upvote 0 Downvote
eto balik tayo sa una:
1. saksak mo muna modem mo sa laptop/pc pero naka patay yung modem.
2. open mo yung winspreader at i browse yung firmware ng bm622m
3. click start, pg ng start na, dun mo na isaksak yung modem sa outlet or inshort, i on mo na.
4. yun mg biblink na ang mga led. antayin mung mg blink yung signal led 12345/54321 medyo matagal yan,
antayin mu lang,
5. kapag sabay sabay na ang blink ng led signal, stop mu na ang winspreader.
at patayin yung modem.
6. paandarin mo ulit yung modem..
7. tapos pindutin mo yung reset sa likod ng modem mo
hanggang mg blink yung signal light..
8. tumalon ka sabay sigaw yeeeeeheeeeeyyyyy... haha
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Popular Tags

936 access admin admin access ang antenna b312-939 b315s-936 bm622i bm622i 2011 bm622m broadband converge dsl dv235t fiber fibr firmware globe globe at home home home wifi huawei imbz internet lift lte mac mac 2015 mac address modem openline password pldt pldt fibr prepaid prepaid wifi question router s10g signal sim smart smartbro wifi wimax wimax & canopy modems zlt zlt s10g zte

About this Thread

  • 64
    Replies
  • 4K
    Views
  • 10
    Participants
Last reply from:
BliNd 09

New Topics

Popular On This Forum

Online statistics

Members online
653
Guests online
4,515
Total visitors
5,168
Back
Top