Closed Bm622m 2013 downgrade to bm622m 2012..

Bm622m 2013 > dv smart gp > bm622m 2012

ready ka sir ng smart gp v7 firmware, use winspreader

step by step

1.open winspreader,load your Firmware smart gp
2.choose your network adapter, realtek pcie or atheros para iwas sira
3. Tagalin sa saksakan si modem
4.Hit start on winspreader pag nagsstart na
5. isaksak muli si modem adapter
6. hayaan lang mag disco light taas baba ang ilaw
7.pag all 5 led lights open, Click stop kay winspreader at hugutin si modem
8. after succesful flashing magiging 192.168.15.1 or 10.1.1.254 ang GUI

pag 192.168.1 or 10.254.1.1 na ang gui


Set mo si IPV4 mo static ip

192.168.15.2 or 10.1.1.1

at iflash si bm622m 2012


After succesful flashing ulit


punta ulit sa IPV4 mo, click mo yung automatically recieve na, bale default na,hindi na static


Open telnet 192.168.254.1 or putty 192.168.254.1 port 22

type in


Firefly

$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

ayan, 622m 2012 na,parang bago ang modem mo


Tried and tested na 4x ko na ginagawa toWrong section po dapat sa Wimax canopy help and request section, next time po

try ko to sir maraming salamt... off muna ako subkan ko kaso nga pla ung fimrware ng smartv7 ko fwd na atan mero kapo ba dyan...ay sir hindi napo nagdidsko ang ligth nang modem ko pag napapalit ng fw.. ok lang po ba un...

kaya di nagdidisco light,kase di binabasa ng network mo ang modem, keep trying lang, tyagaan lang talaga dyan

ganun po ba salamat po....

sir hindi napo kayang ibalik sa globe yung fw nia ilang try na ako palaging cdc xa kea hinayaan ko nalang xa sa gp fw nia.salamat po sa tuts kung may mac sana ng smart at key at pem para masubukan ko if gumagana pa sya...

maiibalik mo pa,fail lang flashing mo medyo mahirap lang talaga.

wrong section ito ts. dito po lang sana tayo nag post.
Home Broadband Modems

thanks

GravityZer05 said:

wrong section ito ts. dito po lang sana tayo nag post.
Home Broadband Modems

Click to expand...

sorry po and thanks sa pag lipat..

Lift said:

maiibalik mo pa,fail lang flashing mo medyo mahirap lang talaga.

Click to expand...

sir litf panu ba mag flash ng tama..

sundan molang yung step by step sa taas at yung command proper downgrading yan with matching renew config

sinunda ku naman po eh.. ito po ba gina gamit pang flashing
type mo sa cmd w/ admin rights
arp -d
nbtstat -R
ipconfig /flushdns
ipconfig /release
ipconfig /renew
ito kasi aking..gamit

cmd command lang yan, need mo ng winspreader v0.7 flushing dns lang yang command mo

yan nga po gamit kung winspreader..v0.7 bat ayaw parin..

basahin mo muna yung nasa taas na step by step, should be 2013 model mo, mahirap talaga magdowngrade, yan na yung fastest way na maiitulong ko sa inyo

Lift said:

basahin mo muna yung nasa taas na step by step, should be 2013 model mo, mahirap talaga magdowngrade, yan na yung fastest way na maiitulong ko sa inyo

Click to expand...

salamat po try and try ko nalng po

try nyo na din po visit ito baka makadagdag idea..

Tutorial - ★ ★ ★Wi-tribe EX-230 & EX-250,DV-235,DV235T,OX-230,COMPLETE TUTORIAL (H@ck!ng..Tweaking etc. ) ★ ★ ★

basta meron po kayo winspreader at working na firmware..

Lift said:

Bm622m 2013 > dv smart gp > bm622m 2012

ready ka sir ng smart gp v7 firmware, use winspreader

step by step

1.open winspreader,load your Firmware smart gp
2.choose your network adapter, realtek pcie or atheros para iwas sira
3. Tagalin sa saksakan si modem
4.Hit start on winspreader pag nagsstart na
5. isaksak muli si modem adapter
6. hayaan lang mag disco light taas baba ang ilaw
7.pag all 5 led lights open, Click stop kay winspreader at hugutin si modem
8. after succesful flashing magiging 192.168.15.1 or 10.1.1.254 ang GUI

pag 192.168.1 or 10.254.1.1 na ang gui


Set mo si IPV4 mo static ip

192.168.15.2 or 10.1.1.1

at iflash si bm622m 2012


After succesful flashing ulit


punta ulit sa IPV4 mo, click mo yung automatically recieve na, bale default na,hindi na static


Open telnet 192.168.254.1 or putty 192.168.254.1 port 22

type in


Firefly

$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

ayan, 622m 2012 na,parang bago ang modem mo


Tried and tested na 4x ko na ginagawa toWrong section po dapat sa Wimax canopy help and request section, next time po

Click to expand...

salamat boss at try ko po

thanks dto boss sana magawa ko na tong bm623m ko. thanks ulit

Goood luck