Closed 936 Debranding by Jmox of SB

jonnix21 said:

Ive done it several times but still not pushing through USB mode. Naghard reset na din

Click to expand...

jonnix21 said:

binili ko to open line na, wala lang admin access. need ko kasi ng APN and SMS kaya gusto ko maupdate

Click to expand...

DarkFermions said:

wala po e. paanong parang nasira?


wala po sir e.

Click to expand...

jonnix21 said:

tatary ko ulit kahit naka ilang beses na. hehe

pero may mga nakita akong mga posts din na hindi sila maka USB mode, stuck lang sa BLUE MODE.

nafollow ko naman lahat ng instructions. wawa naman 936 ko

Click to expand...

DarkFermions said:

Unang una po sa lahat hindi akin ang tutorial na ito.
Kay Jmox ng SB to. Credits sa kanya.

nakita ko yung link sa fb ko. kaya tiningnan ko na

actually hindi ko pa ito natetest sa 936 ko. ngayon ko palang susubukan. do it at on your own risk, I'm not responsible for any bad things happens.


Una sa lahat Pasalamat at credit po sa kanila di lang sa kanila at pati na din sa iba nag share ng ideas about debranding ng 936 nadale ko yung 936 debranding gusto ko po ishare bali di po siya detailed instructions
summarize lang po to the point hehe https://phcorner.net/images/smilies/new/dance.gif

https://phcorner.net/showthread...340475&page=13 - sir 34xXx sa idea at procedures
https://phcorner.net/showthread.php?t=1341306 - sir skylit_drive27sep sa idea at procedures
https://phcorner.net/showthread...340475&page=10 - sir jessieartigas para sa firmware


Requirements Kailangan Openline at naka semi admin yung modem sa akin openline na at semi admin na hehe

Follow po tutorial ng blogmytuts muna kung di pa openline at semi admin

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.


1) Pumasok ka sa USB mode ka ng 936 follow tuts ng blogmytuts sa taas
2) Input sa CID Reader Commands Open CID Reader select yung com port ui na ginagamit at input ang mga ito

AT^SFM=1 - factory mode
AT^RESET - reboot modem

3) Mapapansin niyo after ng AT^RESET power light nalang po ang iilaw isetup po yung ipv4 settings ng lan

IP= 192.168.1.100
Subnet Mask= 255.255.255.0
Gateway= 192.168.1.1
Preferred DNS= 192.168.1.1 yung sa baba secondary blank na then ok

4) Pagkasetup po ng ip tanggalin adaptor at usb male to male cable sa pc

5) Run B593s-22 Multicast Upgrade tool select firmware ni sir jessiartigas eto po download link
You do not have permission to view the full content of this post. Log in or register now.
password po ay facebook po extract rar file at select yung bin file sa multicast

6) Start Multicast Upgrade Tool tapos saksak adaptor lang ng 936

7) Mag flaflashing yan mag steady blue sa una then magbliblink ng white theng turn to kulay green w8 niyo lang mga 5 mins lahat po
basta hintay lang po di naman po sobrang tagal hehe

8)After Mag kulay green led status ng 936 stop na po yung multicast upgrader and close na po

9)Saksak USB male to male sa pc then run cid reader select com port ui mo then input mo mga command na ito

AT^SFM=0 - lalabas ng factory mode
AT^RESET - reboot modem

10) Set na ipv4 settings ng lan sa automatic obtain automatically pati dns tapos login ka na sa GUI 192.168.8.1 the user at pass parehas
po admin then click restore defaults settings ok na debranded na enjoy po hehe

Pansin ko po kahit mag reset debranded pa din at di nawawala pagkaopenline di ko pa natry ule mag usb mode hehe

Yun lang po salamat po eto lang po screenshot ko sensya na po https://phcorner.net/images/smilies/smile.png

May nag feedback po na updateable yung firmware ok naman siya same as retail version na din talaga tapos medyo humina daw sagap ng signal pero depende pa din sa location at positioning ng modem hehe

- Salamat Jmox from Darkfermions and PhCorner

Click to expand...

longone said:

sinundot mu ba yung reser botton sa likod?????

Click to expand...

jonnix21 said:

yes. nakailang sundot na ako and forced USB mode using multicast, yaw pa din

Click to expand...

longone said:

dapat di mo sinundot yung reset botton..may kaka pareho sila ni 931 pag sinundot mo yung reset botton..

Click to expand...

mulot said:

Ito share ko na rin dito ang south africa telkom firmware.

WARNING! updated to version 21.313 ito, hindi na detected ang usb mode sa PC pero updated firmware means stable, bugless at optimized speed. After flashing, login sa web gui at restore defaults.

Para sa naka-globe firmware pa lang: You do not have permission to view the full content of this post. Log in or register now.

Para sa naka-middle east/21.300 version/unang debrand: You do not have permission to view the full content of this post. Log in or register now.

Screenshot:

Click to expand...

-bigfish- said:

sir mulot pwede bang eto ipasok sa multicast para mag USB mode? oh need paring yung 931.BIN sa USB mode

Click to expand...

mulot said:

Medyo hindi ko na-gets. Kung para maging-red led, pwede po.

Click to expand...

mulot said:

Ito share ko na rin dito ang south africa telkom firmware.

WARNING! updated to version 21.313 ito, hindi na detected ang usb mode sa PC pero updated firmware means stable, bugless at optimized speed. After flashing, login sa web gui at restore defaults.

Para sa naka-globe firmware pa lang: You do not have permission to view the full content of this post. Log in or register now.

Para sa naka-middle east/21.300 version/unang debrand: You do not have permission to view the full content of this post. Log in or register now.

Screenshot:

Click to expand...

mulot said:

Ito share ko na rin dito ang south africa telkom firmware.

WARNING! updated to version 21.313 ito, hindi na detected ang usb mode sa PC pero updated firmware means stable, bugless at optimized speed. After flashing, login sa web gui at restore defaults.

Para sa naka-globe firmware pa lang: You do not have permission to view the full content of this post. Log in or register now.

Para sa naka-middle east/21.300 version/unang debrand: You do not have permission to view the full content of this post. Log in or register now.

Screenshot:

Click to expand...